14/04/2023
Important of safety line or your lanyard while in height. The lanyard or safety line is designed to connect your full body harness to an anchoring point and it guarantees your safety.
If the work area is not entirely secured with collective fall protection equipment preventing any falls, a complete fall arrest system including a full body harness must be used. The system used must be compatible with the established clearance and movement limits of the designated User.
remember of the Standards for user 1. Full body harness, 2.energy absorbers, 3. Lanyards 4. Work positioning belt and lanyards, 5. Connectors, 6. Guide type fall arresters with flexible anchor line, 7.fall arrest systems. 8.siy harnesses, 9.provisional and transportabl anchoring devices.
Important recommendations
Under no circumstances should the length of the lanyard(safety line) be modified by adding or
removing any part.
BEFORE each use : thorough visual inspection of the seams, strap, buckles and additional equipment. Everything mus be in perfect condition. If there is any doubt, replace the lanyard(safety line) immediately. Ensure that any rescue can be performed safely. Check that the clearance complies with that neened by the absorber ot thr other fall arrest systems.
BEFORE AND DURING EACH USE:
Keep the safety line(lanyard) away from sharp edges, weld spatter, heat source and corrosive chemicals.
The lanyard or safety line mjst ne removed from service and given to the manufacturer for verification in the event of a fall or obvious defect.
The lanyard(safety line) must be designated to one single user.
Check the compatibility of all of the arrest systems components, connectors, absorber reels,
Verify compliance with the recommendation of each associated Element.
The anchoring point, should be located above the user Resistance 1000kg
Fact sheet: to be completed, retained and filled in during the products life cycle.
Do not make any changes, to the lanyards or safety line.
An annual inspection, by the manufacturer or a person authorized by the company is mandatory.
Follow the general rules for the use, of protective equipment - especially in training the user.
Ensure that all necessary means, were implemented to guard against any danger and that evacuation will be possible in the event of a fall.
MAINTENANCE , SANITIZATION AND STORAGE
This safety line or lanyards are make with polyester and polyamide webbing
1. Clean, the straps and buckles with soapy water to avoid chemical erosion. Strictly respect this method of cleaning.
2. After washing or exposure to the Element, let it dry naturally in a ventilated place. After washing or exposure to the elements, let it dry naturally in ventilated place.
3.STORE the lanyards or safety line in a ventilated area. During transport and storage, pay attention to ultraviolet rays, humidity corrosive atmosphere, high temperature difference , all mechanical aggression and all machanical shock.
4. The life expectancy of the lanyard (safety line) is 10 years from the manufacturing date:the mandatory requirements being that all recommendations for use, transport, and storage have been respected and that all testing has been performed.
DOUBLE SHOCK ABSORBING LANYARD OR SAFETY LINE
This product is made of either 25 mm flat webbing, three strand rope or static braid folded in a Y-shape sewn tear away webbing to limit the impact on the body to 600 daN( maximum) in tbe event of a fall.
Warning :this product can only be usef if the clearance available undet the uset feet is sufficient.