Motion Control Blogger

01/18/2025

Motion Control – Fluidline Bearings Available from LM76 are FDA/USDA/3A-Dairy Compliant!

Motion Control – Thermoplastic Linear Bearings

E. Longmeadow, MA — Motion Control – Linear Motion Bearings – FDA/USDA/3A compliant bearings, Seals, Shafting, and Pillow Blocks are available from LM76.

LM76 Fluidline BearingsTM are long wearing thermoplastic polyester self lubricating, low coefficient of friction, light weight linear bearings. Available off-the-shelf in standard closed inch sizes (closed metric sizes are available on request) these bearings drop-in replacements for standard linear bearings. They are highly resistant to wash-down chemicals and high energy radiation such as gamma and x-rays.

These motion control bearings exhibit very good dimensional stability, and creep resistance, excellent stain resistance, and physiologically inert and therefore suitable for food contact. They work well on stainless steel shafting and on the less expensive ceramic coated aluminum shafting also available from LM76.

Also available from LM76 are other FDA/USDA/3A compliant low cost linear bearings, in open and closed styles, compliant scrapers, stainless steel pillow blocks, and stainless steel and ceramic coated shafting.

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of motion control linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog … … LM76 thinks solution!
For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: [email protected] or visit the website at http://www.lm76.com

Engineering Edge directory link

12/26/2024

Motion Control – High Precision Three-axis Stages Adds A New Dimension to Pitch and Roll Stages … … Lift!

Motion Control – ZGG Stage – Lift Plus Dual Goniometers

Motion Control – New High Precision Three-axis ZGG-60-10-15 Series of Lift, Pitch, and Roll Stages have been released by Optimal Engineering Systems, Inc. (OES). These compact motion control stages feature 60 mm +/- 2 mm (2.362 in. +/- 0.078 in.) of vertical travel.

See the ZGG Stage in Action Click on the Youtube Link – https://youtu.be/I7YQ3LycIwA

The scissor lift design combined with precision roller bearings and slide rails assures smooth motion and very high parallelism throughout the raising and lowering of the table. The Pitch and Roll angles are created by two goniometers with +/- 10 degrees of travel (pitch) and +/- 15 degrees of travel (roll).

The integration of the vertical lift and goniometers enhances the identifying crystals, examining cutting edges of medical instruments, estimating hyperspectral bidirectional reflectance, gloss measurements, measurements of radiation patterns of LEDs, directing lasers, aligning mirrors, and manufacturing of quartz oscillator plates using quartz cutting x-rays.

The Motion Control ZGG-60-10-15-01 (shown) is driven by a Two-Phase Stepper Motor with micro-stepping capabilities. The vertical repeatability is typically +/- 5 microns and typical positional accuracy is 15 microns. Option ZGG-60-10-15-04 is driven with a stepper motor and has a Quadrature Incremental Optical Encoder for position verification.

The ZGG-60-10-15-02 is driven by a Three-Phase Brushless Servo Motor with a Quadrature Incremental Optical Encoder, and the ZGG-60-10-15-03 is driven by a DC Brushed Servo Motor with a Quadrature Incremental Optical Encoder. The Servo Motor options provide sub-micron repeatability and positional accuracy typical of a closed loop system, and higher travel speeds.

These stages require a Motion Controller that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, trackball, and keypad control.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: [email protected] or visit the website at http://www.oesincorp.com

See this and other Innovative Automation Components from OES (Optimal Engineering Systems, Inc.) ... ... OES is now on YouTube …..https://www.youtube.com/watch?v=wdUzIagcMYc

10/30/2024

Motion Control – Maxon’s New ESCON2 DC controller elevates precision, speed, and torque management

The new ESCON2 controller, for brushed DC and brushless DC motors up to 1,800W continuous duty, is designed for OEM integration into customer systems. ESCON2 enhances control with features including field-oriented control (FOC) and acceleration and velocity feed forward.

Maxon, a leader in DC motor and drive solutions, has unveiled its latest innovation: the ESCON 2 controller. This advanced speed and current controller, designed for micro motors, significantly enhances control precision. The ESCON 2, suitable for brushed and brushless DC motors up to 1,800W continuous duty, is engineered for seamless OEM integration into customer systems.

The ESCON 2 has enhanced control features, including field-oriented control (FOC), acceleration, and velocity feed-forward capabilities. This controller supports 4-quadrant operation, allowing precise management of forward and reverse directions and braking. It can handle DC motors up to 3,600W peak duty and provides a continuous current of 30A, peaking at 60A.

Building on the foundation of its predecessor, the ESCON motor controller, the ESCON 2 introduces several new features that elevate control capabilities. The FOC functionality ensures smoother and more precise operation, boosting overall performance. Acceleration and velocity feed-forward enhance response times and control accuracy, while high control cycle rates enable rapid and precise speed and torque adjustments to varying conditions.

To further increase control precision, the ESCON 2 integrates seamlessly with absolute encoders, incremental encoders, and Hall sensors, expanding customization options for OEM designs. It can function as a standalone controller with analog and digital signal command capabilities or as a slave within a CANopen network, enhancing connectivity for industrial applications. Additionally, the ESCON 2 offers USB and RS232 support, allowing operation via Windows or Linux workstations. Extensive, configurable digital and analog I/O options include eight digital and two analog inputs and three digital and two analog outputs.

With its high-power density and compact design, the ESCON 2 integrates easily into various systems. Available in a Module PCB format for direct OEM installation, it measures just 67mm x 43mm x 7.8mm. A Compact format with pre-fitted connectors is also available, measuring 93.5mm x 46mm x 41mm, for effortless assembly.

Maxon’s Motion Studio graphical user interface simplifies drive system configuration, monitoring, and diagnostics. Motion Studio’s intuitive interface is accessible to new users and provides advanced control options. Its Autotune functionality streamlines the process of achieving optimal motor control performance. Motion Studio is free to download and reflects Maxon’s commitment to making motor control easy and efficient for all users.

Discover the future of precision control with the new maxon ESCON 2 controller, designed to meet the demanding needs of modern OEM applications.
For more information, visit ESCON Product Information at:
https://www.electromate.com/mechatronic-automation/mechatronic-automation-components/servo-drives/positioning-and-speed-controllers-for-micro-motors/

About Electromate:
Electromate specializes in robotic, mechatronic, and motion control solutions. We focus on high-performance and precision applications for the industrial automation sector.

More on Electromate can be found at
Website: http://www.electromate.com

10/18/2024

Motion Control – 12.7 mm (0.500 in.) Diameter Miniature Linear Voice Coil Servo Motors Have 25.4 mm (1.000 in.) of Travel!

Moticont is releasing two 12.7 mm (0.500 in.) diameter Linear Voice Coil Motors, the LVCM-013-032-02M (Metric) and the LVCM-013-032-02 (Imperial). These brushless high speed linear servo motors have a 25.4 mm 1.000 in. long stroke, and a high-force-to-size ratio of 0.70 N (2.5 oz.) and a peak force of 2.20 N (7.9 oz.) at 10% duty cycle.

Known also as moving coil motors or linear actuators they are ideal for: Dispensing, work holding and clamping, assembly, testing, wafer handling, animation, dynamic vibration absorption, scanners and laser beam steering and filtering.

Featuring low inertia and high acceleration/deceleration they are: Clean, quiet, efficient, and have high accuracy and high repeatability when operated in a closed loop as a DC Servo Motor.

These miniature motion control motors are just 49.2 mm (1.94 in.) long at mid-stroke. The LVCM-013-032-02M (Metric) Linear Voice Coil Motor has a M3X0.5 threaded mounting hole in the center of the housing and the coil end, and the LVCM-013-032-02 has 4-40 UNC-2B threaded holes for easy integration of these linear servo motors into a new or existing application.

Control electronics are available for both motors.

Is there a need for a smaller or larger diameter motor, one with longer travel, or more force? There are 12 series of Moticont’s LVCM series of motion control motors based on diameter of the motor, and over 50 models based on length of stroke and/or force to select from. To find the right motor for your application go to http://moticont.com/voice-coil-motor.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard motion control products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, [email protected] visit the website at http://www.moticont.co

07/03/2024

Motion Control Technology Newsletter – Say “Goodbye” to Grease Guns with CeramicSpeed Bearings!

Motion Control Technology Newsletter – SLT Dry L**e
Lubrication Systems have always been a required – but less than desirable – facet of bearing life. What if you could go L**e-Free. For more information, call Mike Quinn 617-538-8756 email: [email protected]

To follow the NEW Series from LM76, THE ENGINEERING EDGE! and learn about interesting Outside-of-the-Box solutions developed by LM76 to solve some interesting linear motion problems! CLICK HERE
https://lm76blogger.com/the-engineering-edge

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: [email protected] or visit the website at http://www.lm76.com

06/21/2024

Motion Control Marketing Video and Product Release Prepared for OES (Optimal Engineering Systems).

Project included: Still Photography and Videography, Writing the "Move" Program of the Dual -axis Stage, Writing the Product Release and Distribution of the release to Editors of Print and Online publications featuring Motion Control Products, Creating the Thumbnail, and Writing text displayed in the video and Uploading the video to the OES to the YouTube Channel - https://www.youtube.com/

The integration of high precision Rotary and Goniometer Stages creates platforms for the precise measurement of curves and angles. The YP100-45 Series (-01 thru -04) of Dual-axis Stages has been released by Optimal Engineering Systems, Inc. (OES). These compact, Yaw Pitch Stages features high precision rotary stages capable of 360 degrees of continuous rotation (clockwise/counterclockwise) and goniometers with +/45 degrees of travel. The table of the goniometer (upper) measures 104 mm x 90 mm with a precision pattern of threaded holes for tooling and fixtures. The YP100-45 Series Dual-axis stages are on a mounting plate for easy integration into new and existing applications.

The YP100-45-02 (shown) is driven by Three-Phase Brushless Servo Motors with Quadrature Incremental Optical Encoders and the YP100-45-03 is driven by DC Brushed Servo Motors with Quadrature Incremental Optical Encoders. These Servo Motor driven stages feature: Sub-micron repeatability and positional accuracy, and higher travel speeds typical of a closed loop servo motor system. The YP100-45-01 and -004 stages are driven by Two-Phase Stepper Motors with micro-stepping capabilities. The repeatability with a 10 micro-steps-per-step driver of the yaw and pitch axes is +/- 0.01 degrees, positional accuracy is 0.001 degrees and resolution is 3.6 arcsec (1 degree = 3600 arcsec). Quadrature Incremental Optical Encoders have replaced the manual adjustment k***s on YP100-45-04 Stepper Motor driven Dual-axis stage for position verification.

The stages are black anodized Aluminum, with a load capacity of 10.0 kg and the rotation center height is 68mm.
These stages require a Multi-axis Motion Controller that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, trackball, and keypad control.

For additional information, contact our sales team at: OES, 6901 Woodley Ave.: Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, or E-Mail: [email protected] or visit the Web site at: http://www.oesincorp.com.

Motion Control Marketing Video and Product Release Prepared for OES (Optimal Engineering Systems).Project included: Still Photography and Videography, Writin...

06/11/2024

Motion Control – New! Three-axis Gimbal Mounts Feature High Resolution, High Load Capacity, Stability, and Four Motor Options!

Motion Control – Three-Axis Gimbal Stage!

Van Nuys, CA – — Motion Control – Four high resolution, high Load, high stability three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). These four new AU270-YPR Three Axis (Yaw, Angular Pitch, and Roll) Gimbal Mounts were developed to be used with larger and heavier: Cameras, telescopes, directional antennas, optics, lasers, tracking and scanning systems. These new, larger, high stability, gimbal mounts are 400 mm wide x 480 mm high, weigh 50 kg and handle loads up to 10 kg and the Roll Axis features a large 90 mm thru hole for cables and optics.

The Yaw (Azimuth), Pitch (Angular Elevation), and Roll Stages of the AU270-YPR all feature high precision 200 mm diameter rotary stages. The Roll Stage has a precision pattern of threaded holes for mounting tooling, cameras, lasers, etc., and a 90 mm through hole. Devices up to 260 mm wide can be mounted on the Roll stage. Each stage features V-groove and crossed roller bearings, is capable of 360 degrees of continuous rotation and is driven by a 180:1 worm gear. Motor options to power each stage include: Two Phase-Stepper Motors (AU270-YPR-01), Three Phase Brushless Servo Motors with Quadrature Incremental Optical Encoders (AU270-YPR-02), DC Servo Motors with Quadrature Incremental Optical Encoders (AU270-YPR-03), or Two-Phase Stepper Motors with Quadrature Incremental Optical Encoders for position verification (AU270-YPR-04). Electrical connections are made using 9 pin DB-9 connectors.

The resolution of each stage is 0.001 degree or 3.6 arcsec with 10 micro-steps per Step Motor Driver in use. Higher resolutions and travel speeds to 45 degrees per second are possible with the servo motor options.

An optional 450 mm x 450 mm aluminum plate with four handles and mounting holes for increased stability is available and these Three-axis Gimbal Mounts can be ordered as a complete plug-and-play system with a multi-axis motion controller, joystick, trackball, or keypad.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: [email protected] or visit the website at http://www.oesincorp.com

OES is now on YouTube …..https://www.youtube.com/watch?v=wdUzIagcMYc

06/02/2024

Motion Control – The S-63-38 Series of 0.38 Inch Dia. Pull Type Solenoids Features 16 Standard models to Meet Voltage, Duty Cycle, Force, and Stroke Requirements of an Application!

Motion Control Technology – Tubular Solenoids

Van Nuys, CA – The S-63-38 Series of Pull Type Tubular Solenoids has been released by Magnetic Sensor Systems (MSS). This series of 0.38 in. diameter solenoids features 16 standard off-the-shelf solenoids to select from based on the Voltage, Duty Cycle, Force and Stroke requirement of the user.

These miniature solenoids featuring a 0.38 in. diameter have a 0.66 in. long housing and when retracted are just 0.80 in. long.

The captive plunger or actuator has a diameter of 0.095 in. and a stroke of 0.090. A glass-filled nylon bearing and the electroless nickel plated plungers contribute to the exceptionally long life of these compact solenoids. Plungers are spring loaded and have a fully rounded tips, making them ideal for being used as miniature latches.

MSS Solenoid coils typically utilize Class “F” 23 to 40 AWG (American Wire Gauge) windings with Class “A” insulation for better protection of the solenoid during longer duty cycles.

These clean, high efficiency, low cost, precise tubular solenoids can be operated at 1/10, 1/4, 1/2, and continuous duty cycles (voltage dependent) and are the ideal choice for: Medical dispensing, mixing, vending machines, valve control, farm machinery, disconnects, transmission shifting, toys, fire suppression systems, cabinet locks, latching, door controls, and sorting equipment. An optional, compact clamp permits easy installation and allows for precise linear positioning of the solenoids.

About Magnetic Sensor Systems – Established in 1983, Magnetic Sensor Systems (MSS) designs and manufactures high quality motion control solenoids, electromagnets, driving electronics and other types of electro-mechanical components for a variety of industries and applications.

Part of Magnetic Sensor Systems’ competitive advantage is its state-of the-art in-house manufacturing facility in North America. Highly controlled processes, committed staff and extensive testing complement their product design strengths. This enables Magnetic Sensor Systems to supply the most demanding clients from specialized small orders to high volume just-in-time deliveries. Magnetic Sensor Systems is an ISO 90001:2015 certified company.

Through wise and aggressive use of their resources and technology, MSS has become recognized as one of the world’s leading solenoid manufactures with a global customer base.

An extensive line of standard products are ready to be shipped immediately from stock, however, when required, their highly trained design engineers, are always available to work with a customer’s design staff to augment or develop a custom product to fit the specific needs of the customer.

For additional information contact the Sales Team at Magnetic Sensor Systems, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-9444, Tel: +1 (818) 785-6244, E-Mail [email protected] or visit the website at http://www.magneticsensor systems.com

05/23/2024

Follow and Like as you Explore the Sub-micron Positioning World of Miniature High Precision Linear Actuators at https://www.facebook.com/EquipmentSolutions.Blog/

05/20/2024

Motion Control – Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications with a Series of 18 Push Type Open Frame Solenoids with a 1 Inch Stroke!

Motion Control – Push Type Open Frame Solenoid

Motion Control Solenoids – Van Nuys, CA — Push Type Solenoids from Magnetic Sensor Systems (MSS) includes a series of 18 different low-cost open frame solenoids to select from based on the Voltage, Duty Cycle, Force of up to 96 oz (26.7 N) and stroke requirements of the user. These clean, high efficiency, low-cost S-18-100-QH Open Frame Push Type Solenoids can be operated at a variety of duty cycles (voltage dependent) and are the ideal choice for: Medical dispensing, mixing, valve control, disconnects, vending machines, farm machinery, transmission shifting, fire suppression systems, cabinet locks, door controls, assembly and sorting equipment.

This series of light weight 4.0 oz (1.11 N) solenoids has a stroke of up to 1.000 in +/- 0.02. (25.4 mm +/- 0.508 mm) is 1.00 (25.4mm) wide x 0.84 in. (21.34 mm) high x 1.735 +/- 0015 (44 mm 0.381 mm) long. A low friction brass guide along with a PTFE coated plunger assures exceptionally long life. For easy integration into new and existing applications, these solenoids feature 0.187 (4.8 mm) spade connectors and on each side, two 8-32 or M4 x 0.7 threaded mounting holes. The coils typically utilize 23 to 40 AWG (American Wire Gauge) windings with Class “F” insulation for better protection of the solenoid during longer duty cycles.

These Open Frame Solenoids can create (voltage dependent) up to 61 oz (16.9 N) of force continuously and up to 96 oz (26.7 N) of force at a 10% duty cycle near the end of stroke.

The efficiency of a Solenoid is a factor of mechanical geometry, electrical configuration and magnetic permeability of core, plunger and housing.

For a tutorial on Solenoid Selection Factors go to – http://www.magneticsensorsystems.com/selectionfactors

An extensive line of standard products are ready to be shipped immediately from stock, however, when required, their highly trained design engineers, are always available to work with a customer’s design staff to augment or develop a custom product to fit the specific needs of the customer.

For additional information contact the Sales Team at Magnetic Sensor Systems, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-9444, Tel: +1 (818) 785-6244, E-Mail [email protected] or visit the website at http://www.magneticsensor systems.com

05/20/2024

Motion Control – Exor Introduces Next Generation Wireless HMI: Exor X5

Motion Control – Wireless HMI!

Vaughan, Ontario, Canada — Motion Control Components — Exor, a leading provider of industrial automation solutions, is proud to announce the release of its latest product, the Exor X5 Wireless HMI. This cutting-edge device is designed to revolutionize the way industrial operators interact with their machines and equipment.

The Exor X5 features a sleek and durable design, with a 5-inch color display and a user-friendly interface. It utilizes the latest wireless technology, allowing operators to access and control their machines from anywhere on the production floor. The device also includes a built-in web server, enabling remote access and monitoring from any web-enabled device.

In addition to its advanced connectivity capabilities, the Exor X5 also boasts a range of powerful features, including:

Real-time
data acquisition and visualization
Customizable alarms and notifications
Advanced reporting and data analysis tools
Compatibility with a wide range of industrial protocols
The Exor X5 is the perfect solution for industrial operators looking to improve efficiency, increase productivity, and reduce downtime. It is suitable for use in a variety of industries, including manufacturing, food and beverage, and energy.

Features include:

Linux-based open platform
System settings by web browser
2 Ethernet ports for network separation WAN/LAN
Dual-band Wi-Fi for safety communication to handheld devices
Ready for Corvina Cloud secure remote connectivity
Supports JMobile protocols including OPC UA server and client
For more information, visit Exor X5 Wirelesss HMI Brochure

About Electromate:
Electromate specializes in robotic, mechatronic, and motion control solutions. We focus on high-performance and precision applications for the industrial automation sector.

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology.

More on Electromate can be found at
Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

05/16/2024

Motion Control – Electric Cylinder Has Zero Cogging and High Throughput!

Motion Control – Zero Cogging Electric Cylinder

Van Nuys, CA – Motion Control – Components -– Moticont has added another non-commutated linear actuator to its DDLM series of low cost actuators. This new DDLM-019-070-01 Linear Actuator can develop 10.1 oz (2.8 N) of continuous force and 32.1 oz (8.9 N) of peak force at 10% duty cycle. Having a stroke of 0.960 in. (24.4 mm), this clean, fully enclosed linear actuator, also referred to as an electric cylinder is ideal for use in critical medical applications.

Measuring just 0.750 in. (19.1 mm) in. diameter with a housing length of 2.750 in. (44.5 mm) long, this zero cogging, bi-directional actuator is easily integrated into new and existing applications. Each end of the shaft is threaded for direct coupling of the actuator to the load resulting in zero backlash allowing for smooth, high speed positioning, and high acceleration/deceleration resulting in greater throughput.

The 0.125 in. (3.2 mm) diameter shaft has an internal thread on each end, a total of length of 4.960 in (126.0 mm), and extends 1.585 in. (40.3 mm) past the mounting end of the actuator. The shaft extends thru the 3/8-32 UNF x 0.250 (6.4 mm) long threaded studs at each end of the housing which can be used for mounting the DDL-019-070-01 linear actuator. Long life plain linear bearings support the internal shaft at both end of the actuator.

Highly controllable force, stroke length and speed, low noise, and maintenance free, the DDLM-019-070-01 can be used with a position sensor and controller for the high repeatability and accuracy of a closed loop application.

Highly controllable force, stroke length and speed, low noise, and maintenance free, the DDLM-019-070-01 can be used with a position sensor and controller for the high repeatability and accuracy of a closed loop application.

For additional information contact Joseph Hanks at Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: [email protected] or visit the website at http://www.moticont.com.