28/08/2025
FUJIFILM
Value from Innovation
NEW ASK-400
Dye-sublimation Printer
The printer has many great features brings a great success to your on-site photo business.
Compact size
High Speed
High Durability
Value-added prints
(Images shown: Standard Print, Sticker Print, Square Print)
---
Value-added prints such as Sticker & Square are suitable for images shot by smartphone.
A variety of functions for smooth operation
Compact Size
This compactly 170 mm-high printer can be installed in an area equivalent 0.1 m² with minimal interference.
Dust-Proof Design
A separator creates different passages of air for the thermal head and power supply. The high air pressure in the printer prevents dust from entering.
Easy Operation
Replacement of paper and ink ribbons is easily performed by pulling out the front panel of the printer.
Energy Saving Design
With power consumed in sleep mode, only 0.5 W or less, the printer contributes to energy saving and cost reduction.
---
Sticker Print
You can put the sticker anywhere you like after peeling the sticker from the separator.
Square Print
You can get cute Square prints after cutting off two margins along the pre-cut by your hand.
---
ASK-400 Specifications
Printing method: Dye-sublimation thermal transfer (D2T2)
Foot print: 0.10 m²
Line-up of consumable(*1):
Standard Print: 5×7", 6×8"
Square Print: 3.5×5"
Sticker Print: 6×8"
Print size(*2):
Standard Print: 3.5×5", 5×5", 5×7", 4×6", 6×6", 6×8"
Square Print: 3.5×3.5", 89×89 mm (pre-cut paper)
Sticker Print: 4×6", 6×8"
Surface finish(*3): Glossy type, Matte type
Ribbon finish: Yellow, Magenta, Cyan and Overcoat
Printing resolution(*4):
300 × 300 dpi (Standard mode)
300 × 600 dpi (High Quality mode)
Operation for paper exchange: Semi-Auto Loading
Design life (printer body): 200,000 prints of 4×6" size
Number of prints:
Standard 3.5×5": 460 sheets, 5×7": 230 sheets in 1 roll
Standard 4×6": 800 sheets, 6×8": 200 sheets in 1 roll
Square 3.5×3.5" (89×89 mm): 460 sheets in 1 roll
Sticker 4×6": 400 sheets, 6×8": 200 sheets
---
*Print speed(5)
Standard 4×6": approx. 8.4 sec (Glossy type, Standard mode)
Square 3.5×3.5": approx. 7.6 sec (Glossy type, Standard mode)
Sticker 4×6": approx. 13.0 sec (Glossy type, High Quality mode)
---
Dimensions (W × D × H)
10.8" × 14.4" × 6.7" (275 mm × 366 mm × 170 mm)
Weight: approx. 12.4 kg (28.6 lb)
Interface: USB 2.0 Type B connector
Power supply: 100V–240V 50/60 Hz
Driver software(*6): Windows 7 / Windows 10 (32 bit / 64 bit)
---
Dimensions (Installation space)
Width: 275 mm
Depth: 366 mm
Height: 170 mm
Clearance: 20 mm (sides), 200 mm (rear), 250 mm (front)
---
Notes
(*1) Printer memorizes the consumable type (sticker or others) when such is first loaded into the printer and then the printer is locked with the type.
(*2) Square print and sticker print cannot be made in all countries.
(*3) Glossy finish and Matte finish cannot be changed when loaded.
(*4) High quality mode is available for sizes of 4×6" / 5×7" / 6×8" prints.
(*5) The print speeds are measured from the time the printer receives image data to the time the printer ejects prints. Excluding the PC processing time. Print speeds vary depending on data volume and software.
(*6) Please use the driver software provided by FUJIFILM for Windows 7 / 10 (32 bit / 64 bit).
---
FUJIFILM Corporation
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
Ref. No. LB-###XE (SK-20-07 F8KS) ©2020 FUJIFILM Corporation
