JG3DP

Directions Contact the business

JG3DP Hobby Printing - focussing on self design/modelling and functional prints I have 20 years experience in construction and 15 years in Environmental Health. Cheers

I enjoy designing and building projects that are tangible and that the end users can enjoy or gain some benefit from. 3D printing was always an interest so I dived into it at the recommendation of a good friend. It definitely is a steep learning curve but fortunately my basic CAD background helped with learning 3D modelling software. A lot of what I print is functional, although I do print toys and trinkets for the Grandkids. Ultimately this is a hobby for me and the only prints I aim to sell are those I have personally designed or hold software commercial licence to sell (Hueforge).

Well with the new H2D printer I have named Big Dog I have finally been able to model and print skid plates for my Goldha...
10/10/2026

Well with the new H2D printer I have named Big Dog I have finally been able to model and print skid plates for my Goldhawk 14"x9" and Minelab 11" mono. With 2.5mm base thickness, 3mm wall and an addition 2mm radiused bump head at the base printed in tough ASA I'll be taking the 14x9 out for a test run soon. My favourite local supplier - RAW3D Filament ASA Cool White and Black.

I incorporated into the design 5 wear indicators (logo included) which have an approx depth of 1.5mm. So when the black wears out you know you have 1mm of plate thickness left. I also think it could be a handy guide to help improve swing technique noting areas that wear quicker than others. If you do wear out certain areas out quicker you may even be able to rotate the plate to buy more time before replacement. These fit snug but will still require taping to stop dust etc getting in.

Anyway we're heading out on the 19th so we'll see how they go. I may call out for test pilots for the 11" mono as mine doesn't get much of a run anymore.

Another little project, this one to assist our older Border Collie to get up the fold out ramp into the Cruiser safely. ...
10/10/2026

Another little project, this one to assist our older Border Collie to get up the fold out ramp into the Cruiser safely. Previously just balancing the ramp on the rear bumper I designed this towbar ramp support to clip into the underside of the ramp to make it sturdy for Carter when walking up the ramp. Printed in tough ASA, came up a treat and works well.

A little fun project for the Starlink Mini. Bought one of those 30v step up converters even though I run a short lead an...
19/09/2026

A little fun project for the Starlink Mini. Bought one of those 30v step up converters even though I run a short lead and generally don't have issues with voltage drop. Whipped up a nice little box with LED and switch that I'll fix to my battery box so there's no more need to pull the Anderson out every night. Printed on the new H2D printer named "Big Dog".

Gday Legends - finally got the Gold Monster 2000 stand finished and I'm pretty happy with the end result! With packing d...
15/09/2026

Gday Legends - finally got the Gold Monster 2000 stand finished and I'm pretty happy with the end result! With packing down and fitting in gear bags etc a key consideration I have designed this stand to be disassembled quickly and easy. Simple install - bolt the 2 shaft grips together at a shaft location of your choosing, slide stand base on the M5 bolt and locate pins, spin on the thumb nut and tighten.

The shaft grip is designed to fit the 22mm GM shaft but I have designed some room there to accommodate down to 20mm shafts. The base of stand spans approx 210mm and has a height of approx 115mm from the underside of the shaft to ground.

All bolts etc are supplied - Black Stainless
Grey 22mm shaft for demonstration purposes only 😄

Total weight including hardware 125 grams.

Made from durable RAW3D Filament Sunlu HS Matte Black PETG.

$30 plus $11 postage anywhere in Au. Perth pick ups by arrangement.

G'day guys. An actual print post😁 Noticed my Mycoolman fridge lid opener had snapped one tang off on the last trip so mo...
08/09/2026

G'day guys. An actual print post😁 Noticed my Mycoolman fridge lid opener had snapped one tang off on the last trip so modelled and printed a new one. Took a few protos to get the close perfect and of course I couldn't just have a boring plain one. 🤣🤣

Another prospecting trip done and dusted between the 20th and 27th, was meant to be out there until the 29th/30th but th...
07/09/2026

Another prospecting trip done and dusted between the 20th and 27th, was meant to be out there until the 29th/30th but the 23mm forecasted downpour for Fri/Sat meant we bailed on the Thurs. This trip we hit the eastern fault to continue to explore the theory of the diagonal shear through all 3 faults.

Jas snagged a small nugg on the Fri in the lower wash area (Day 1 of detecting) so we gridded that area out hard - nothing more. Saturday we got 1.5hrs in and then some forecasted "showers" hung around all f_cken day!!

Over the next few days I picked up a few nuggs in random spots. Jas went 3 days with SFA. I'm pretty sure I spotted a python curled up in a hollow fallen tree and was definitely chased up a tree by a rogue donkey lol!! We heard them honking, Jas was about 500-600m away, I was about 100m's away. I picked out a tree in case and sure enough this healthy looking Jack came in too fast too furious only to hit the skids about 50m's away. By then I had already walked up the bent salmon gum trunk and was about 1.5m's up off the ground. To be fair I don't think he was going to do anything, there were about 4 others and I'm guessing there was Jill and maybe a foal around hence his bravado.

There was noticeably heaps more birdlife down the south east end of the lease, with a pair of hawks over our heads most days, maybe a reason we didn't see many crows lol. The wildflowers were coming out and it was pretty green in most parts.
There was evidence of others being there i.e. a hairclip and panadol foil blister pack, along with some old VB cans etc.

We saw the min min lights one night - small floating lights heading north and south toward Venus which then disappear when they get close to Venus, no port and starboard lights and no flights on flight tracker!! We watched them for about 30 mins then Venus turned off!! No probing was reported or admitted in the morning!
On what was our last day (Wed) Jas snagged a nice 2 grammer out the back end right on top of the alleged fault line. In the end we got ourselves 8.24 grams which will barely pay our expenses but better than a poke in the eye with a sharp stick.

Although we didn't get enough "samples" the theory is still viable as a pattern is somewhat taking shape. Hopefully we'll get back out there late October (Kulin Races pencilled in start of Oct) and maybe squeeze another last trip in before it gets baking out there.
I'll be loading up the trip vids on my Youtube Channel soon.

Gawn prospecting - be back around the 30th😁
20/08/2026

Gawn prospecting - be back around the 30th😁

Another niche little print for some Agility friends. These are dog Touch Training discs to apparently teach your agility...
17/08/2026

Another niche little print for some Agility friends. These are dog Touch Training discs to apparently teach your agility dog to stop and touch at certain points before going onto or exiting equipment i.e. skywalk/balance beam. Anyway it's all very technical 😁 but beats using a cd if they even still exist. Made from durable PETG, specifically printed in blue and yellow as dogs vision is more adept at picking up those colours. Small spike to push into the grass and keep it in place.

2 for $15 plus $11 shipping anywhere in Au.

Mucking around with a design for a Goldmonster 2000 Stand - 22mm shaft. After some user input seeings I don't have nor u...
10/08/2026

Mucking around with a design for a Goldmonster 2000 Stand - 22mm shaft. After some user input seeings I don't have nor use a GM2000. For pack down would a stand with legs/base that unscrews be more desirable or not a big deal?

This model is made up of three pieces - the mount and mid section will bolt onto 22mm shaft in front/behind armrest via 2 x M5 bolts (Philips) with a M5 Hex head bolt protruding through the mid section. Those sections will remain on the shaft and only require initial install. The base/legs will then be able to screw on and off by hand.

Just working on the best way to add stops once the base is tight. Legs span 210mm and should sit the GM approx 125mm from base of shaft to ground.

Likely fit other detectors that run 22mm - 20mm shafts as there's 2mm adjustability between top and mid mounts.

Open to user suggestions - if I can draw it I can print it!!

Had a little project to do today as part of the print/sewing room reno. Had to frame out a desk carcass out of 70mm x 35...
26/07/2026

Had a little project to do today as part of the print/sewing room reno. Had to frame out a desk carcass out of 70mm x 35mm so modelled and printed these last night to assist. Nice having an extra hand!

Address

Perth, WA

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when JG3DP posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to JG3DP:

Shortcuts

Share