A.R VLOG

31/03/2026

4 Types of Quality Management

31/03/2026

𝗪𝗵𝗮𝘁 𝗶𝘀 𝗗𝗛𝗨 (𝗗𝗲𝗳𝗲𝗰𝘁𝘀 𝗽𝗲𝗿 𝗛𝘂𝗻𝗱𝗿𝗲𝗱 𝗨𝗻𝗶𝘁𝘀)? 𝗔𝗻𝗱 𝗪𝗵𝘆 𝗜𝘁 𝗠𝗮𝘁𝘁𝗲𝗿

In garment manufacturing, quality is not just about final inspection—it’s about controlling defects throughout the production process. One of the most important indicators used on the production floor is 𝗗𝗛𝗨 (Defects per Hundred Units).

𝗗𝗛𝗨 simply tells us how many defects are found in every 100 pieces produced. It helps us understand the overall quality performance of a sewing line or factory.

For example, if 100 garments are checked and 12 defects are found, the DHU will be 12. This means the defect level is relatively high and needs immediate attention.

A high DHU indicates problems such as poor operator skill, improper handling, machine issues, or lack of standardization in operations. On the other hand, a low DHU reflects better process control, skilled operators, and effective quality management.

In real factory conditions, DHU is not just a number—it is a signal. For instance, if defects like open seams, skipped stitches, or puckering are repeatedly found in one operation, it clearly points towards a specific issue in that area. Identifying and fixing these root causes can significantly reduce rework and improve efficiency.

Industrial Engineers and Quality teams continuously monitor DHU to track performance, identify problem areas, and take corrective actions. Even small improvements in DHU can lead to major cost savings and better customer satisfaction.

💡 𝗜𝗻 𝘀𝗶𝗺𝗽𝗹𝗲 𝘄𝗼𝗿𝗱𝘀: 𝗬𝗼𝘂 𝗰𝗮𝗻’𝘁 𝗶𝗺𝗽𝗿𝗼𝘃𝗲 𝘄𝗵𝗮𝘁 𝘆𝗼𝘂 𝗱𝗼𝗻’𝘁 𝗺𝗲𝗮𝘀𝘂𝗿𝗲—𝗗𝗛𝗨 𝗵𝗲𝗹𝗽𝘀 𝘆𝗼𝘂 𝗺𝗲𝗮𝘀𝘂𝗿𝗲 𝗾𝘂𝗮𝗹𝗶𝘁𝘆.

31/03/2026

Here are some important abbreviations commonly used in the garment (apparel) industry, especially in merchandising, production, and quality control:

🧵 General Garment Terms
RMG – Ready-Made Garments
GSM – Grams per Square Meter (fabric weight)
MOQ – Minimum Order Quantity
FOB – Free on Board (shipping term)
CIF – Cost, Insurance, and Freight
CM – Cost of Making
CMT – Cut, Make, Trim
L/C – Letter of Credit

📦 Merchandising & Order Management
PO – Purchase Order
PI – Proforma Invoice
TNA – Time and Action Plan
BOM – Bill of Materials
SMV – Standard Minute Value
PP Sample – Pre-Production Sample
TOP Sample – Top of Production Sample
Fit Sample – Sample for fitting approval

✂️ Production & Sewing
CAD – Computer-Aided Design
CAM – Computer-Aided Manufacturing
MP – Marker Planning
CUT – Cutting Section
SEW – Sewing Section
FIN – Finishing Section
WIP – Work in Progress
RFT – Right First Time

🧪 Quality Control (QC) & Inspection
QA – Quality Assurance
QC – Quality Control
AQL – Acceptable Quality Level
DHU – Defects per Hundred Units
PPM – Parts per Million
FQI – Final Quality Inspection
OQL – Outgoing Quality Level

🧵 Fabric & Trims
CW – Color Way
LAB DIP – Lab Color Development Sample
F/B – Fabric Booking
TRIMS – Accessories like buttons, zippers, labels
Y/D – Yarn Dyed
PFD – Prepared for Dyeing

🚢 Shipping & Logistics
ETD – Estimated Time of Departure
ETA – Estimated Time of Arrival
BL – Bill of Lading
AWB – Air Waybill
FCL – Full Container Load
LCL – Less than Container Load

👕 Compliance & Safety
BSCI – Business Social Compliance Initiative
SEDEX – Supplier Ethical Data Exchange
OEKO-TEX – Textile safety certification
ISO – International Organization for Standardization

⏱️ Efficiency & Performance
KPI – Key Performance Indicator
OEE – Overall Equipment Effectiveness
IE – Industrial Engineering
SAM – Standard Allowed Minute

31/03/2026

🔺Understanding Key Quality Control (QC) Documents in Projects
In any engineering or construction project, maintaining quality is not just a requirement—it’s a responsibility. A structured QC system ensures consistency, compliance, and reliability at every stage.
Here are some essential QC documents every professional should be familiar with:

🔸 ITP (Inspection & Test Plan)
Defines inspection stages and responsibilities
Aligns with codes, standards, and specifications
🔸 MAR (Material Approval Request)
Ensures material compliance before procurement
Includes TDS, MSDS, and manufacturer certifications
🔸 MIR (Material Inspection Request)
Verifies delivered materials at site
Confirms batch traceability and certification
🔸 WIR (Work Inspection Request)
Request for inspection before/during/after ex*****on
Ensures work meets approved drawings and procedures
🔸 MS (Method Statement)
Step-by-step ex*****on plan with safety and QA/QC measures
Includes risk assessment and resource planning
🔸 NCR (Non-Conformance Report)
Identifies deviations from standards or specifications
Helps in corrective and preventive actions (CAPA)
🔸 SOR (Site Observation Report)
Highlights observations needing attention
Not always a non-conformance but critical for improvement
🔸 IR (Inspection Report)
Final record of inspection results and approvals
Includes checklists, test results, and site evidence

📌 Conclusion:
Strong documentation leads to strong ex*****on. A well-managed QC system ensures project success, safety, and long-term reliability.

31/03/2026

SOP = The Foundation of Lean Manufacturing

In Lean, improvement starts with standardization.
Without a clear standard, there is no baseline to improve.

🔶 Standard
Define the best known method (today)
→ Reduces variation and creates stability

⚙️ Operating
Execute the work consistently at the gemba
→ Builds discipline and repeatability

🔴 Procedure
Follow simple, visual step-by-step flow
→ Makes problems visible and training easier

When SOP is strong, Lean tools become powerful:
✔️ 5S stays sustained
✔️ Kaizen has a clear baseline
✔️ Standard Work is repeatable
✔️ Waste (Muda) becomes visible

💡 No Standard → No Kaizen
You can’t improve what isn’t controlled.

Lean is not about doing more.
It’s about doing the right things—consistently.

Six Sigma DMAIC step by step - Define - Measure - Analyze - Improve - Control...
https://youtu.be/1JbDR8F4U34

31/03/2026

"Vacancy Announcement"
(100% Export Oriented Sweater Manufacturing Factory)
Factory Name: Titas Sweater Industries Ltd
Address: Kashimpur Road, Konabari, Gazipur-1700.
1. Position: Executive – Welfare & HR (Only Female Apply.)
Experience Requirements: The Applicants should have at least 02-03 years of practical experience In the Compliance Dpt.
Education: Graduation/Masters in any discipline.
Compensation & Benefits Package:
• Salary payment within 7 working days.
• Festival Bonus (yearly, two).
• Earn Leave encasement.
• Yearly Salary Review
• Resignation Benefit
• Maternity Benefit
Others Benefit as per the Company Policy
Salary: Negotiable
Deadline: 20/04/2026
If you are interested, then apply for the post and if you are not interested, then don't apply for the post.
Interested candidates are requested to send their CV/Resume through the
E-mail- [email protected]
[email protected]

31/03/2026

31/03/2026

We Are Hiriring

Position: Merchandiser (Paper Carton / Packaging)

Company: YG Sunny Paper Packaging (BD) Company Ltd.

Location: [Ward 04, Sardagonj, Gazipur]

Educational Requirement:

• Bachelors/ Honors

• BSc in Textile Engineering or equivalent

• Preference will be given candidates based on experience

Job Responsibilities:

• Handle buyer communication and follow-up on orders

• Prepare quotation, costing, and negotiate prices with buyers

• Coordinate with production, printing, corrugation, and delivery teams

• Ensure on-time order ex*****on and shipment

• Monitor order status and provide updates to buyers

• Maintain documentation related to orders

• Develop new clients and maintain relationships with existing buyers

Requirements:

• BSc in Textile Engineering

• 1–3 years experience in merchandising (Carton / Packaging preferred)

• Strong communication and negotiation skills

• Knowledge of costing and production processes

• Ability to handle multiple orders simultaneously

Salary & Benefits:

Negotiable (based on experience)

As per company policy

Contact (Whatsapp) : 01829467030

Deadline: ASAP

30/03/2026

🔔 Urgent Vacancy Announcement.

 *Sr. Executive/Asst. Manager, IE & Planning* - 02 Persons
Experience: 6-11 Years
Education: B.Sc. in Textile

 *Sample man* - 12 Persons
Experience: 4-9 Years
📌 Note: We are looking for Oven (Padding & Down Jacket) Experience candidate. So, related Candidates must have practical knowledge in the Oven (Padding & Down Jacket).

Salary: Negotiable

Job Location: Trishal, Mymensingh.

🗓 Deadline for CV submission: 05-April-2026

If you have any suitable candidate, please advise to send their resume directly to +880 1824-656222 (WhatsApp)/ [email protected] (E-mail). Please mention your applied position when sending CV.

⚠️ Important Note: Please do not call via phone/WhatsApp regarding this position.

✅ আমার দেওয়া চাকরির বিজ্ঞাপন গুলো বিভিন্ন অনলাইন মাধ্যমে সংগ্রহকৃত। তাই আবেদন করার আগে নিজ দায়িত্বে যাচাই করে নিবেন। ধন্যবাদ 💚

✅ ঘরে বসে Professional & ATS Friendly CV বানিয়ে নিতে চাইলে আমার সাথে যোগাযোগ করতে পারেন।

06/06/2025