Gbcranes

09/09/2026

🏗️ A single girder overhead crane is not just about how much it costs.
What really worries customers is what happens after the crane arrives on site:
⏱️ How long will installation take?
🔌 Will the electrical wiring need to be done again on site?
🛠️ Will commissioning involve repeated troubleshooting?
📊 Can potential problems be identified before they cause downtime?
⚠️ And when the crane suddenly stops, who will deal with it?
These “problems beyond the equipment itself” can often become a significant part of the real project cost.
That is why CLESCRANE CHS Single Girder Overhead Crane is designed with these practical challenges in mind.
🔧 We try to complete as much work as possible before the crane leaves the factory.
The crane electrical system, hoist control system, and end carriage drives can all be pre-wired and power-tested at the factory. Heavy-duty connectors simplify on-site connections, reducing installation and commissioning work and helping the overhead crane get into operation faster.
📈 But we also look beyond the day the crane is installed.
With predictive maintenance, the overhead crane’s operating status and key operational data can be monitored in real time. Potential issues can be identified early, allowing maintenance to be planned before a problem turns into unexpected downtime.
⚙️ Key electrical and drive components from internationally recognized brands such as SEW and Schneider can also be selected to support stable operation, longer service life, and lower maintenance requirements.
🔄 Different applications require different crane configurations.
CHS can be flexibly configured according to actual working conditions, with options such as anti-sway, wireless remote control, weighing display, second lifting limit, and second brake.
The goal is simple: to make the overhead crane fit the customer’s operation, rather than forcing the customer to adapt to a standardized solution.
🤝 CLESCRANE also provides localized installation services, together with project-specific installation, operation, and maintenance documentation, giving customers clear and complete support from delivery through commissioning and daily operation.
Because customers don’t just need an overhead crane that can lift loads.
What really matters is:
Less trouble on site.
Less unexpected downtime.
Less maintenance pressure.
And more time spent running reliably.
That is the value an overhead crane should deliver.

www.clescrane.com
Whatsapp: +86 135 2350 1202
Email: [email protected]

07/09/2026

⚠️ What is the biggest concern for customers when using cranes in hazardous areas?

It is not the lifting capacity, nor is it just the operating speed.

🔍 It is: Does the equipment truly meet explosion-proof requirements? Can it operate safely and stably over the long term?

🏗️ CLESCRANE EX-CHD explosion-proof overhead crane, equipped with the CHEX explosion-proof wire rope electric hoist, is designed specifically for hazardous environments. Relevant explosion-proof products have obtained ATEX certification and comply with the European ATEX 2014/34/EU Directive and relevant explosion-proof standards.

📍 It is suitable for Zone 1 and Zone 2 gas explosion-proof areas, as well as Zone 21 and Zone 22 dust explosion-proof areas, with lifting capacities of up to 63 tons.

⚙️ From explosion-proof motors and electrical systems to overload protection, limit protection, thermal protection and power-off braking, every key detail is designed around safe and stable operation.

🛡️ For hazardous areas, safety cannot rely on experience, and even more so, it cannot rely on “good enough.”

✅ Choose CLESCRANE explosion-proof cranes that comply with ATEX requirements, making every lift safer and more reassuring.

www.clescrane.com
Whatsapp: + 86 135 2350 1202
Email: [email protected]

02/09/2026

31/08/2026

32/5T Explosion-Proof Double Girder Overhead Crane | FAT Testing for the Indonesia Gas Processing Plant Project

The 32/5-ton explosion-proof double girder overhead crane supplied by CLESCRANE for the Indonesia Gas Processing Plant Project is currently undergoing FAT (Factory Acceptance Test) at the Gaobai factory.

The crane, model EX-CHD32/5t-18m-10.6m, is designed for the Treated Gas Compressor Shelter, with a strong focus on safety, reliability, and stable operation to meet the demanding requirements of gas processing facilities.

During the FAT, the crane is comprehensively inspected and tested, including:
🔹 Main and auxiliary hoisting operation tests
🔹 Bridge and trolley travel tests
🔹 Hoisting and travel limit switch tests
🔹 Electrical control system inspection
🔹 Explosion-proof components and safety protection inspection
🔹 Overall crane operational performance testing

Every test is an important quality verification before the crane is officially delivered.

From engineering design and manufacturing to factory testing and delivery, CLESCRANE maintains strict quality control throughout every stage, ensuring that the equipment meets the demanding requirements of gas processing, energy, and other industrial applications.

High-standard testing is not just about acceptance—it is our commitment to every delivery.

CLESCRANE continues to provide safe, reliable, and high-performance lifting solutions for customers worldwide.

Whatsapp: +86 135 2350 1202
Email: [email protected]
Web: www.clescrane.com

26/08/2026

CLESCRANE Intelligent Monitoring Unit enables real-time monitoring of crane operating conditions, helping customers move from “reactive repair” to “proactive maintenance”.
🔧 Intelligent Condition Monitoring — Making Equipment Status Transparent
By collecting and analyzing key operating data, including:
• Equipment running hours
• Hoisting and traveling cycles
• Load variations
• Motor and drive system conditions
• Critical component parameters
Customers can:
✅ Optimize maintenance schedules
✅ Identify potential risks in advance
✅ Extend component service life
✅ Reduce unplanned downtime
📡 Digital Connectivity & Remote Support — Improving Service Efficiency
Future cranes are not only mechanical equipment, but also intelligent systems connecting data, technology, and services.
Through digital connectivity:
• Support remote condition analysis
• Accelerate fault diagnosis
• Improve service response speed
• Increase overall equipment availability
Through intelligent monitoring and digital technologies, CLESCRANE helps customers improve equipment reliability, safety, and operational efficiency.

www.clescrane.com
Whatsapp: +86 135 2350 1202
Email: [email protected]

25/08/2026

From Manufacturing to Delivery, CLESCRANE Ensures Reliable Project Ex*****on

Recently, the 32/5-ton explosion-proof double girder overhead crane and 5-ton single girder overhead crane supplied by CLESCRANE for the Indonesia Kasuri Gas Processing Plant Project have successfully completed pre-assembly at the GBCRANES factory and are ready for the upcoming FAT (Factory Acceptance Test) by the owner.

The equipment will be installed in the Treated Gas Compressor Shelter and Maintenance Workshop respectively, meeting the material handling requirements of different operating areas within the gas processing plant and providing reliable support for safe and efficient project operation.

Considering the demanding operating environment of the natural gas processing facility, the CLESCRANE project team conducted comprehensive inspections and verification before shipment, covering crane structure, electrical systems, explosion-proof configuration, and overall operating performance to ensure the equipment meets strict requirements for safety, stability, and reliability.

For overseas energy projects, on-time delivery and long-term operational stability are the key concerns of customers. Through strict manufacturing processes and quality control, CLESCRANE helps minimize project risks before shipment and provides reliable support for on-site installation and future operation.

From engineering solutions to manufacturing and delivery, CLESCRANE remains committed to providing trusted lifting solutions for global energy, petrochemical, and industrial customers.

www.clescrane.com
Whatsapp: +86 135 2350 1202
Email: [email protected]

21/08/2026

Before equipment delivery, what customers truly care about is: Can it stand the test of real-site operation?

Before shipment, CLESCRANE is carrying out factory pre-assembly of the project’s key equipment — the 32/5 Ton Explosion-Proof Double Girder Overhead Crane, which is about to enter the FAT (Factory Acceptance Test) stage.

During the FAT, we will conduct comprehensive verification of the crane structure, operating performance, electrical control system, and safety protection functions to ensure every critical detail meets the project requirements.

From manufacturing to final delivery, CLESCRANE always puts quality verification ahead of delivery, completing thorough inspections and performance validation before the equipment leaves the factory.

Every delivery is built on proven reliability.

www.clescrane.com
Whatsapp: +86 135 2350 1202
Email: [email protected]

20/08/2026

The value of an overhead crane is not only reflected in its manufacturing completion, but also in whether it can be smoothly installed, quickly commissioned, and meet project requirements after arriving at the job site.

For critical industrial projects such as gas processing plants and petrochemical facilities, installation efficiency, commissioning time, and equipment reliability directly affect the overall project progress.

Unexpected issues at the site may result in:

• Installation schedule delays
• Longer commissioning periods
• Additional coordination costs
• Increased project delivery pressure

Therefore, before shipment, CLESCRANE performs pre-assembly inspections and internal testing to verify key equipment performance in advance and help customers reduce uncertainties during site installation and commissioning.

Recently, the 3-ton single girder overhead crane supplied by CLESCRANE for the Indonesia Kasuri Gas Processing Plant Project completed factory pre-assembly and underwent internal Pre-FAT testing.

The testing process focused on:

✓ Hoisting mechanism performance
✓ Long travel and cross travel functions
✓ Electrical control system verification
✓ Safety protection functions
✓ Overall crane operating stability

This is not the final customer witnessed FAT, but an important internal quality control procedure carried out by CLESCRANE before the official FAT.

We believe:

Solving problems at the factory
is far more valuable than solving them at the project site.

Through pre-assembly, functional testing, and performance verification, CLESCRANE ensures that key systems are fully checked before customer inspection and site installation, providing stronger support for smooth project ex*****on.

This crane is part of the Indonesia Kasuri Gas Processing Plant Project. The project also includes the EX explosion-proof 32/5-ton double girder overhead crane supplied by CLESCRANE, which will serve critical areas such as the Treated Gas Compressor Shelter.

Every year, hundreds of overhead cranes and industrial lifting equipment are manufactured, assembled, inspected, and tested at CLESCRANE’s manufacturing base, GBCRANES, before being delivered to industrial projects worldwide.

Because customers need more than just a crane.

They need:
More efficient project ex*****on,
More reliable equipment performance,
And greater confidence throughout the project lifecycle.

CLESCRANE - Reliable Lifting Solutions for Global Industry.

www.clescrane.com
Whatsapp: +86 135 2350 1202
Email: [email protected]