Silverback Bikes

Silverback Bikes This is the place where People are the Real Heroes Silverback creates award- and race-winning bicycles.

Mountain bikes, e-Bikes, Fat bikes, Road bikes, Gravel bikes, Hybrid bikes, Ladies and Kids bikes.

08/09/2026

🎬 HOW TO: Assemble Your Bike (Step-by-Step)

95% of your bike is already assembled… but these steps are critical.

📦 1. UNBOX
* Carefully remove the bike from the box
* Remove all packaging

🚴 2. INSTALL FRONT WHEEL
* Insert the wheel correctly into the fork
* Secure using quick release or thru axle
* Tighten firmly
👉 A loose wheel is dangerous — always double check.

🔧 3. FIX THE HANDLEBAR
* Align it perfectly with the front wheel
* Tighten bolts evenly (cross pattern)
👉 Make sure it’s straight — this affects your control.

🛑 4. CHECK BRAKES (VERY IMPORTANT)
* Spin the wheel
* Pull brake levers
* Ensure proper stopping power
👉 “Never skip this step.

⚙️ 5. CHECK BOLTS & TORQUE
* Check stem bolts
* Check seatpost clamp
* Check wheel tightness
👉 Tight is not enough — secure is safe.

🚀 6. FINAL CHECK + FIRST RIDE
* Do a quick visual inspection
* Take a short test ride
👉 “Now your bike is ready — ride safe.”

📲
Save this before assembling your bike.

🔥 Follow for more HOW TO bike setup tips

05/09/2026

Quick step-by-step (so you know what to look for in the video)

TOOLS REQUIRED:
1. tire levers
2. New tube
3. New tire
4. Pump or air compressor

Even before watching, here’s the simple process:
1. Remove the wheel from your bike
* Open quick release or axle
* Take the wheel off the bike
2. Deflate completely
* Remove the valve Let all air out
* Let all air out
3. Remove tire
* Use tire levers
* Pry one side of the tire off the rim
4. Take out the tube
* Pull the valve out first
* Remove the tube fully
5. Check tire & rim, rim tape for damages
* Remove glass, thorns, debris
* Prevent another flat
6. Put tire back on
* Push tire bead back onto rim ((important!) to prevent “8” in your tyre
* Make sure you follow the tire arrow direction label on the tyre.
* Avoid pinching the tube
7. Install new tube
* Slightly inflate it first (important!)
* Insert valve → place tube inside straight as shown in the video
8. Make sure valve is straight (important!)
9. Check tire direction (especially MTB/road)
* Make sure you follow the tire arrow direction label on the tyre.
10. Push the tire bead back onto rim (important!
11. The bead must seat properly to prevent “8” in your tyre
12. Check the correct pressure before inflating it (always mentioned on the tyre
13. Install tire
* Avoid pinching the tube
14. Inflate tire
* Check alignment
* Pump to correct pressure (always mentioned on the tyre)
15. Close the valve

⚠️ Pro tips (most people mess this up)
* Always slightly inflate the tube before installing
* Start mounting opposite the valve
* Never use tire levers for final part (can pinch tube)

If this helped you fix your flat, hit like 👍 and subscribe for more real bike mechanic tips.

28/08/2026

Stop riding the wrong bike.

This is what a real trail bike looks like. Built to handle rocks. Roots. Drops. Built for real trails — not just the easy ones.

👉 Switch to the bike built for real trails!

24/08/2026

Don’t blink. This moment is gone in seconds.
🚫 What you see is only the final shot…
👉 What it takes to get here is something else entirely.
⚡ Precision. Trial. Obsession.
👇 Watch closely — you won’t see this twice.
🔔 Follow for more behind-the-scenes.

12/08/2026

THIS SHOULD NOT LOOK THIS CLEAN.

Look closer… you’ll see it.

Discover the difference now → SE: SERIES STEP 9 https://bit.ly/4wXQW22

03/08/2026

Have you ever watched your suspension work? 👀

Your fork and rear shock are constantly working to keep your tyres planted, improve traction and absorb impacts.

Watch closely… you'll never look at your bike the same way again.

👉 Discover the Silverback range:

https://www.silverbackbikes.de

28/07/2026

TECH REVEAL 🔧

Most riders never notice what makes a bike ride better...
Until now.
In this episode, we're taking a closer look at the engineering behind the Silverback SE:SERIES Enduro 11.
✔️ SR Suntour Edge rear shock
✔️ Shimano CUES drivetrain
✔️ Progressive suspension design
✔️ Built for control, comfort & confidence
Because great rides start with great engineering.

👇 What component should we reveal next?

Adresse

Ohmstrasse 18 Stuttgart
Nürtingen
72622

Öffnungszeiten

Montag 09:00 - 13:00
14:00 - 17:00
Dienstag 09:00 - 13:00
14:00 - 17:00
Mittwoch 09:00 - 13:00
14:00 - 17:00
Donnerstag 09:00 - 13:00
14:00 - 17:00
Freitag 09:00 - 13:00
14:00 - 17:00
Samstag 09:00 - 13:00

Telefon

+4970229777818

Webseite

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von Silverback Bikes erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.

Service Kontaktieren

Nachricht an Silverback Bikes senden:

Verknüpfungen

Teilen