Pearson Signs

30/09/2017

Had a bit to finish on the back of the van I did earlier on in the week so took some better photos once it was finished today,

29/09/2017

Well this certainly wasn't a 5 minute job lol, will get some better pictures latter, the barbed wire is chrome with a black outline, the rest is just cad cut vinyl.

18/09/2017

Managed to get this one fitted on Saturday, wall was pretty uneven so I put two batons on the wall for the sign to sit on. Customer is happy so I am lol

03/09/2017

Did these boards a few weeks ago for The Fringe but was asked not to post pictures until after it was finished. Theses were done at very short notice with next to no brief which seems to happen to me quite a bit lol. Was told that the 2 larger boards had to look like a Station or have something to do with trains, one of the other ones was a bedroom wall & the last one was a wall from a block of Glasgow flats with Graffiti on it.
I was told that they received some very good comments about them which is always nice to hear.

27/08/2017

Another sign for Fife Dog Rescue, this one is to go on the wall outside their unit so people know where they are. Can't make my mind up if Meg approves or not lol

26/08/2017

Had a bit of trouble getting this job finished due to the weather, unfortunately it was to long to fit in the unit lol
This is just done with normal Yellow & Red vinyl, as opposed to the Fluorescent yellow & reflective red that chevrons would usually be done with.

24/08/2017

Been doing a few little jobs & keep forgetting to take pictures, this was a small aluminium sign to fit on a post to direct people to Fife Dog Rescue, have done a few other bits for them as well all in vinyl for them to apply to the walls in various rooms within their unit. Seems wall art is quite popular.

06/05/2017

29/04/2017

Did this job last week but as usual forgot to post the picture, this is white 3mm ACM (Aluminium Composite Material) Covered with Orange & then the blue & black applied over the top of the orange. The space to the right of the telephone number has been left deliberately so a web address can be added once it is completed.

01/04/2017

Job I have just done is one of those that could be done 2 different ways, firstly with cad cut vinyl & secondly by digital printing, this is a 4 colour job so digital print could possibly work out to be more cost effective.
I chose to do it with cut vinyl however, the artwork was supplied by the customer as a low quality jpeg, first process is to completely redraw it. Auto trace programs don't do so well when the image is as low quality as this was so it is often quicker to start from scratch & draw by hand.
The customer was on a tight budget so the existing boards they had were cleaned of old graphics so they could be re used. Vinyl was then applied & built up in the various layers, starting with the background colour, then the black on top of that followed by the gold & white. Being done with solid colour cad cut vinyl means that this will outlast a digital print, personally I also thing that most of the time the colours look far more vibrant than a print but everyones opinion will be different.

30/03/2017

Installed this yesterday for Cloybank Phoenix who are an Air Gun club. 1 metre square digital print mounted on to 3mm aluminium composite material.
The sponsor asked me to install it well away from any of the actual courses as he was worried that with 2 stags heads on it people would take pot shots lol