https://www.facebook.com/256332884225385/

Sloppy Prints

Home
United Kingdom
Stalbridge
Sloppy Prints

3D Printing fun things for ALL ages!

26/04/2026

It’s been a while since I last posted, but trust me—the printer hasn’t stopped 👀

I recently dug out some special Formula One cards I pulled years ago and wanted a proper way to get them up on the wall. I had a couple of box frames tucked away in the loft, but just sticking the cards in there felt… a bit too sloppy.

So I took it a step further.

I tracked down the drivers’ signatures, turned them into 3D models, and printed them alongside the cars to create something a bit more unique.

Honestly, I’m really happy with how they turned out.

What do you reckon?

07/04/2026

Another one off the printer… and this one’s a bit different 👀

After making a Blastoise birthday gift the other day, I’ve now had a go at a Pikachu for a friend ⚡

But couldn’t just leave it as a figure… so I turned it into something a bit more fun — a Pokémon card holder.

And let’s be honest… what’s better than a cheering Pikachu?
A Pikachu cheering for your favourite card!

Not the easiest print, a few fiddly bits as always… but really happy with how this one turned out.

Not perfect. But not too sloppy.

04/04/2026

Looks like the Easter Bunny has upgraded… 🐰🖨️

He’s only gone and got himself a 3D printer and has been busy making something a little different this year…

Keep your eyes peeled around the village 👀
You might just stumble across a surprise egg hiding somewhere… and trust me, they’re not your usual chocolate kind!

👀 Little hint…
They come in white, blue, red and black…
and you might have more luck along a trailway 😉

If you find one… crack it open and see what’s inside 🐣

Happy Easter from Sloppy Prints!

29/03/2026

Been working on a birthday present this past week… and I’m properly chuffed with how it turned out 🔥
Shout out to NED1236 for the model and AKi3D for the remix!

This is Blastoise from Pokémon — printed over multiple sessions, glued up, and finished off with something a bit special… glow-in-the-dark filament.

Not the easiest stuff to print with, but after a bit of tweaking it behaved itself. Give it a charge in the sun and it comes alive at night 👀

Genuinely my favourite print to date. So much so I’ll be sad to him go. But hopefully will make someone else just as happy.

Definitely not the quickest project I’ve done, but worth every hour.

Who’s your favourite Pokémon?

15/03/2026

Been working on a little personal project in the background for a while now.

Some of you may have spotted the driver-signed F1 card displays before — this is where the idea originally started.

I wanted to create a full 2026 F1 drivers signature display, all turned into 3D printable models and framed together. It actually took quite a bit of time tracking down the signatures and converting each one so it could be printed cleanly.

Definitely not perfect… but not too sloppy either. 😉

Really happy with how it came out in the frame.

What’s your favourite signature?

08/03/2026

🐰 Easter Bunny HueForge Prints 🐰

These Easter bunny pieces took a bit of patience… about 5 hours each on the printer! But I think they came out really nicely in the end. The detail on these always amazes me.

For anyone wondering, HueForge is a type of 3D print that creates an image by carefully layering different coloured filaments. Instead of painting the picture afterwards, the printer builds the colours into the print itself by changing filament at specific heights. The light passing through the layers creates the shading and depth.

A slower print for sure, but the results are worth it! 🐣

What do you think?

05/03/2026

Been a while since I updated this counter, but when I noticed the follower total I had to post an update…..we’ve hit 67 followers!!

so I had to print a little 67 buddy. 😆

And be honest… when you read 67, did your brain go “six… seven”?

Thanks for the follows everyone — really appreciate the support! 👍

01/03/2026

🔥 ThunderCats… Ho! 🔥

This LEGO-inspired Lion-O headed out today as a birthday present — and he was a big build! Lots of individual pieces on this one, but it all came together brilliantly in the end… even if he doesn’t look too pleased about it 😆

Really happy with how the details turned out, especially that Sword of Omens and the gauntlet. Definitely one that stands out on the shelf!

What brick character would you like to see?👇
Drop your suggestions in the comments

13/02/2026

🛡️ How did I forget about this big lad?! 🖨️

Meet the latest guardian off the printer… a Minecraft Iron Golem in all his blocky glory.

This one was built as a birthday surprise, and I’m hoping he will be proudly standing guard in someone’s bedroom — keeping watch for zombies, creepers… and possibly Mum and Dad sneaking in. 😂

Really enjoyed putting this together. Big, bold, and full of character. The layered detailing and those glowing red eyes make him properly come to life.

11/02/2026

Tried something a bit different with this one – a large surface area light box featuring a moonlit scene with two cats and a tree silhouette.

I’ll be honest… this tested me a bit. I haven’t done many prints with this much flat surface before, and it definitely took a couple of attempts to get it dialled in properly.

It’s still not absolutely perfect (we’re always our own worst critics), but that’s part of the process – every print teaches you something new.

Most importantly, it’s gone to someone who loved it (I hope) And that’s what it’s about.

Let me know what you think…..

Address

Stalbridge
DT10

Website

facebook.com

Alerts

Be the first to know and let us send you an email when Sloppy Prints posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Want your business to be the top-listed Advertising & Marketing Company in Stalbridge?