LFP repair service

25/05/2025

Mimaki, Mikachip emulator explanation.

https://www.lfp-repair-service.com/product-page/ink-chip-emulator-mimaki-support-lus120-lus170-lh100-cs100-sb610-sb411-bs4Rewritable Chip Emulator for Mimaki...

06/05/2025

What is a Mimaki Chip Emulator?

Good question — those black bits with the little red lights sticking out are replacements for Mimaki chips, or MikaChip chip emulators attached to each ink cartridge!

Chip emulators tell the printer important information about each ink cartridge, like the color, type, ink level, and compatibility.

The red light on emulators usually means the chip emulator is active and communicating with the printer correctly — like a "status OK" signal.

These chip emulators are super important because without them, the printer might refuse to print, even if there’s physically ink inside.

Chip emulators are used when:

People use non-original inks (like cheaper third-party ink)

They refill the cartridges themselves

They override ink restrictions (such as expiration date locks)

Where can I find those black long chip emulators?

MikaChip chip emulators are pretty common in the printing aftermarket world! You can usually find them in places like:

eBay (sometimes listed as "MikaChip emulator" or "Mimaki chip emulator") eBay Link

In Our store LFP Repair Service Link

Chinese suppliers like Made-in-China Made-in-China Link

You might want to search with keywords like:

"MikaChip chip emulator"

"Mimaki chip emulator"

"MikaChip printer chip resetter"

"Mimaki printer chip emulator"

Important: Make sure you match the ink data file for the chip emulator to your ink type (like LUS120, LUS150, TP400, etc.) and printer series. Otherwise, it might not recognize correctly.

How do I load an ink data file into the MikaChip chip emulator?

For the MikaChip Mimaki chip emulator, here’s the basic procedure for how to load an ink data file:

Steps to Load an Ink Data File into MikaChip Emulator:
Install the MikaChip Software

Install the MikaChip software on your Windows computer (it comes with the device, or you can download it via a link provided by the supplier).

Connect the Programming Cable

Plug the MikaChip programming cable into your computer using a USB cable.

Install any required drivers if needed.

Connect the MikaChip Emulator

Connect the MikaChip emulator to the programming cable.

Mimaki chip replacement MikaChip emulator

Mimaki chip replacement MikaChip emulator

Launch the Software

Open the MikaChip application.

Select the required COM port and press the Connect button.

Load the Ink Data File

In the software, select the option like “Load File”.

Browse and select your ink data file.

Program / Write the MikaChip Emulator

After loading the file, click “Write”.

The software will flash or display a progress bar.

Wait for Confirmation

It usually takes 30–40 seconds.

You should get a success message like "Completed Successfully".

Remove and Install

Safely remove the chip emulator.

Install it into your printer where the original chip would normally go.

Important Notes:
Make sure you load the correct ink type (for example: LUS120, SB54, BS4, etc.) that matches your printer’s settings.

Do not unplug the programmer during writing — it can corrupt the chip.

03/12/2024

By LFP Repair Services This is one of the most common questions found on industry forums along with whether resetting these parameters voids the printer’s warranty. After realizing they can reset these parameters, these threads always follow up with whether resetting these parameters voids the...

03/12/2024

https://www.signs101.com/threads/ink-chip-resetter-for-mimaki-printers.175715/

MikaChip V1.2 is an ultimate tool to reprogram chips for all models of Mimaki printers with DS2430 ink chips. The Original Mimaki ink chips can be programmed - MikaChip V1.2 resets an ink type, ink level, color and expiry date. The following ink types supported: Mimaki SS1, SS2, SS, SS21*...

03/12/2024

A Chipless Solution for Mimaki Printers? By LFP Repair Services In today’s digital world, we are accustomed to instant and convenient solutions that save us time and money. We use email instead of traditional mail and send electronic copies of documents to avoid the cost and hassle of printing...

03/12/2024

Chip Bypassing Kit for FormLabs 3D Printers By LFP Repair Services A recent development in 3D printing is LFP Repair’s Chip Bypassing Kit for FormLabs Printers. This kit enables users to use alternative resins while continuing to maintain the full functionality of FormLabs 3D printers. Using...

03/12/2024

https://printplanet.com/threads/a-chipless-solution-for-mimaki-printers.293292/

A Chipless Solution for Mimaki Printers? By LFP Repair Services In today’s digital world, we are accustomed to instant and convenient solutions that save us time and money. We use email instead of traditional mail and send electronic copies of documents to avoid the cost and hassle of printing...

03/12/2024

Mimaki UJF-3042 MkII Error codes Mimaki A3 MkII Error Codes Mimaki UJF6042 MkII Error codes

03/12/2024

https://www.lfp-repair-service.com/post/mimaki-ujf-3042-mkii-a3-mkii-ujf6042-mkii-error-codes

Mimaki UJF-3042 MkII Error codes Mimaki A3 MkII Error Codes Mimaki UJF6042 MkII Error codes

02/12/2024

Rewritable Chip Emulator for Mimaki Printers UCJV, UJV, UJF, CJV, JV, JFX, TX.

Set includes 1 Rewritable Chip Emulator, a programming cable and a software.
The Rewritable Chip Emulator is compatible with Mimaki printers as follows:
UCJV, UJV, UJF, CJV, JV, JFX, TX.
The Rewritable Chip Emulator can be loaded with data files for the following ink types: BS4, AS5, SB300, SB310, SB320, SB410, SB411, SB414, SB420, SB610, SB54, SB610, LUS170, LUS175, LUS120, LUS150, LUS200, LUS210, LUS350 LUS125, CS100, CS300, AC300, LX101, SU100, RC300, LH100* (1L), PR100, PR200, UVijetLF and others.
You need as many chip emulators as slots in your printer and only 1 programming cable. (Eg. 4 slots for CMYK - set of 4 chip emulators, 6 slots - set of 6 chip emulators, 8 slots - set of 8 chip emulators)
You can load a data file of any ink type and color into the Rewritable Ink Chip Emulator. We have an extensive library of ink data files.

03/02/2024

How to bypass ink chips:

For more information visit our website: https://www.lfp-repair-service.comMikaChip emulators allow to unlock all known Mimaki printer models. UCJV, UJV, SWJ,...