Flexible Hybrid Slicing 3D Printing

Flexible Hybrid Slicing 3D Printing Flexible Hybrid Slicing 3D printing process technology

Flexible Hybrid Slicing is the new way of very fast 3D printing, with special developed,compatible, inner layer materials.

At THE stand of Felix printers at THE rapidpro. Lots of interest for THE flexible hybrid slicing technologie Showing THE...
03/03/2015

At THE stand of Felix printers at THE rapidpro.
Lots of interest for THE flexible hybrid slicing technologie

Showing THE first printed version of THE game mygrow golf

Today we printed a interesting picture frame with help of the "FHS" principle. The fun part is that the Triple D3 sheet ...
28/02/2015

Today we printed a interesting picture frame with help of the "FHS" principle. The fun part is that the Triple D3 sheet we use acts as a Stick-and-Slide pad. First the PLA filament sticks well to the sheet, being installed after the automatic stop, producing an exiting open back panel with living hinge function and afterwards you just release the sheet with a little pressure; slide it out and replace it with your favorite picture.

The Making of a Stained Glass Church Window with the FHS process technology.See also: http://www.exportoffice.nl/publica...
16/02/2015

The Making of a Stained Glass Church Window with the FHS process technology.See also:http://www.exportoffice.nl/publications/MANUAL%20FLEXIBLE%20HYBRID%20SLICED%20GOTIC%20CHURCH%20WINDOW.pdf and http://youtu.be/PssgLNXfJyo

3D overprint: Exit Sign : the do's and don'tsDo, readjust the Zo height ( add thickness of sheet material ). use a tes...
08/02/2015

3D overprint: Exit Sign : the do's and don'ts

Do, readjust the Zo height ( add thickness of sheet material ). use a test piece to check the Zo height. clamp the sheet tightly to the heating bed ( temp 55 degr.C). use compatible filament to create a permanent bond use comp and hop in order to avoid travel marks

Don't, use warped sheet material use different filament material glue the sheet with low adhesion tape

Pictures: show clamping and good and bad result ( travel marks )

THINKING OUT OF THE BOX : edge of box with groove, realized through the FHS process technology
27/01/2015

THINKING OUT OF THE BOX : edge of box with groove, realized through the FHS process technology

Adres

Markeloo

Telefoon

06 57 19 18 65

Website

Meldingen

Wees de eerste die het weet en laat ons u een e-mail sturen wanneer Flexible Hybrid Slicing 3D Printing nieuws en promoties plaatst. Uw e-mailadres wordt niet voor andere doeleinden gebruikt en u kunt zich op elk gewenst moment afmelden.

Contact

Stuur een bericht naar Flexible Hybrid Slicing 3D Printing:

Snelkoppelingen

Delen