Motion Control Web, Rio Rancho, NM (2026)

01/18/2025

Motion Control – Solenoid Driver Module from Magnetic Sensor Systems is Energy Stingy!

Motion Control – Solenoids – Driver Module

Motion Control – Solenoids – Van Nuys, CA – Magnetic Sensor Systems (MSS) Has released the SDM840 Solenoid Driver Module as a complement to their Series of Solenoids and those of other manufacturers that includes: Tubular, Open Frame, Low Profile, Hinged Clapper, Latching, and Rotary Solenoids.

This compact, quiet 20 kHz pulse width modulated driver module measuring just 1.65 in. x 2.50 in. is designed to consume less energy by first applying the voltage for a pre-determined period of time necessary to activate the solenoid and when the plunger is seated, drop the voltage to a level sufficient to hold the solenoid in the seated position conserving energy and avoiding overheating the solenoid’s coil.

This also allows smaller solenoids to be used when a large force at a long stroke is required by applying high voltage to the solenoid providing the necessary force to pull the plunger in, then dropping the voltage down to maintain the plunger in place.

Designed to operate with a supply voltage of 8 to 40 VDC at a peak current of 20A, the SDM840 Solenoid Driver Module has a Command or Trigger Voltage of 2 to 40 VDC. Having a Trigger is especially useful when using solenoids requiring higher voltages and the command voltage is lower such as a TTL signal. The readily available options for Pick Time is 100, 250 and 1,000 mSec, while different values for Pick Time can also be provided. After the plunger is seated, the factory setting for the holding voltage drops to 30 percent of the supply voltage, however the holding voltage can be adjusted by the user via an on-board potentiometer.

Mounting is facilitated by four 0.15in. diameter holes at the corners of the circuit board, and Screw Terminal Block for electrical connections are for: + and – DC voltage, + and – Trigger voltage, and the Solenoid.

About Magnetic Sensor Systems – Established in 1983, Magnetic Sensor Systems (MSS) designs and manufactures high quality motion control solenoids, electromagnets, driving electronics and other types of electro-mechanical components for a variety of industries and applications.

Part of Magnetic Sensor Systems’ competitive advantage is its state-of the-art in-house manufacturing facility in North America. Highly controlled processes, committed staff and extensive testing complement their product design strengths. This enables Magnetic Sensor Systems to supply the most demanding clients from specialized small orders to high volume just-in-time deliveries. Magnetic Sensor Systems is an ISO 90001:2015 certified company.

Through wise and aggressive use of their resources and technology, MSS has become recognized as one of the world’s leading solenoid manufactures with a global customer base.

An extensive line of standard products are ready to be shipped immediately from stock, however, when required, their highly trained design engineers, are always available to work with a customer’s design staff to augment or develop a custom product to fit the specific needs of the customer.

For additional information contact the Sales Team at Magnetic Sensor Systems, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-9444, Tel: +1 (818) 785-6244, E-Mail [email protected] or visit the website at http://www.magneticsensor systems.com

12/26/2024

Motion Control – Fluidline Bearings Available from LM76 are FDA/USDA/3A-Dairy Compliant!
Motion Control – Thermoplastic Linear Bearings

LM76 Fluidline BearingsTM are long wearing thermoplastic polyester self lubricating, low coefficient of friction, light weight linear bearings. Available off-the-shelf in standard closed inch sizes (closed metric sizes are available on request) these bearings drop-in replacements for standard linear bearings. They are highly resistant to wash-down chemicals and high energy radiation such as gamma and x-rays.

These motion control bearings exhibit very good dimensional stability, and creep resistance, excellent stain resistance, and physiologically inert and therefore suitable for food contact. They work well on stainless steel shafting and on the less expensive ceramic coated aluminum shafting also available from LM76.

Also available from LM76 are other FDA/USDA/3A compliant low cost linear bearings, in open and closed styles, compliant scrapers, stainless steel pillow blocks, and stainless steel and ceramic coated shafting.

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of motion control linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog … … LM76 thinks solution!
For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: [email protected] or visit the website at http://www.lm76.com

See this and other Motion Control Components from LM76 featured on:
The LM76 Blog https://lm76blogger.com/

10/18/2024

Motion Control Products- Miniature Direct Drive Linear Motor with Integrated Encoder and Temperature Sensor is Just 16 mm in Diameter!

Motion Control Products – Miniature Integrated Voice Coil Motor

Moticont is introducing their new miniature 16 mm diameter SDLM-016-032-01-01 Direct Drive Linear Motor with integrated position and temperature sensors. This smallest of the fully enclosed SDLM series of linear motors features zero backlash, zero cogging, high acceleration, high speed, high resolution, and long life.

Also known as an electric cylinder, this compact direct drive linear motor is just 16.0 mm (0.625 in.) in diameter and 31.8 mm (1.25 in.) long. Protected inside the motor housing, the linear optical quadrature encoder is directly connected to the shaft for the greatest possible accuracy. Highest throughputs are achieved by the SDLM-016-032-01-01 linear motor when operating at peak efficiency monitoring the temperature from the internal temperature sensor.

This new SDLM-016-032-01-01 direct drive linear motor has a stroke length of 6.35 mm (0.25 in.) and a continuous force rating of 1.14 N (4.11 oz.) and peak force of 3.6 N (13 oz.) This non-commutated direct drive servo motor features: Quiet long life, plain linear bearings, an integrated internal 1.25-micron resolution quadrature optical encoder, and a non-rotating shaft. Connections are easily made via a flex cable terminated in a 2-by-5 polarized connector.

These miniature linear servo motors are ideal for: Medical devices (e.g. infusion pumps, prosthetic devices, and surgical robots), automotive and consumer products, aerospace (e.g. aircraft, drones, satellites, and rockets), robotics and industrial automation, and laboratory applications (e.g. microscope stages, pipetting, and sampling).

Direct coupling of the load or stage to the low inertia non-rotating shaft eliminates backlash and allows for high acceleration/deceleration. Both ends of the actuator and shaft ends have threaded mounting holes for easy integration into new and existing applications. The SDLM-016-032-01-01 Direct Drive Linear Actuator is also available with a matching servo controller.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: [email protected] or visit the website at http://www.moticont.com

07/03/2024

Motion Control – ADVANCED Motion Controls takes Servo Drives to New Heights (and Depths) with FlexPro® Extended Environment Product Line are available from Electromate!

SERVO DRIVES THAT WITHSTAND THE ELEMENTS AND PUSH BOUNDARIES

Advanced Motion Controls (AMC), a leading provider of servo amplifier solutions, is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro® line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro® line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions. That’s why AMC offers off-the-shelf extended environment servo drives within the FlexPro™, DigiFlex® Performance™, and AxCent™ drive families, as well as custom-made modified servo drives to handle extreme conditions.

AMC’s standard line of extended environment servo drives can achieve operation from -40°C to +95°C, operation from 25,000 meters above sea level to 400 meters below, an IP65 rating for ingress protection, and shock protection up to 25 gms for 5 minutes. And if these limits aren’t enough, AMC can make custom products that exceed them.

AMC’s extended environment servo drives are built to push boundaries, operating properly in conditions where many other electronics fail. They can withstand both scorching and freezing temperatures, high and low pressures, shocks, vibrations, contamination, and other harsh conditions.
Features include:

Operating temperature range: -40°C to +95°C
Altitude range: 25,000 meters above sea level to 400 meters below
Ingress protection: IP65 rating
Shock protection: Up to 25 gms for 5 minutes
Customizable to exceed the above limits
Compatible with EtherCAT and CANopen network protocols
For more information, visit Extended Environment FlexPro Amplifiers

About Electromate: Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated motion control automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at
Website: http://www.electromate.com
LinkedIn: https://www.linkedin.com/company-beta/209277/
Twitter: https://twitter.com/Electromate
Facebook: https://www.facebook.com/electromateindustrial/
Blog: https://electromate.wordpress.com/

06/02/2024

How Could You Use These ... ...High Precision Linear, Pitch, Roll, and Yaw Positioning Stages Featuring Four Motor Options?

The new Motion Control XGGR 50-10-15-60 Series of Four-axis Linear, Pitch, Roll, and Yaw Stages from OES (Optimal Engineering Systems, Inc.) is the integration of a Linear-axis stage, two Goniometer Stages, and a Rotary Stage. The lower Linear axis stage has 50 mm of travel. The Pitch-axis is a +/- 10 degrees Goniometer, the Roll-axis is a +/- 15 degrees Goniometer, and the Yaw-axis (upper -axis) is a 60 mm diameter rotary stage capable of continuous rotation. These compact four-axis Linear, Pitch, Roll, and Yaw stages feature four motor options to meet the precision and speed of travel requirements of an application.

Depending on the levels of precision and speed of travel requirements, four motor options are available. The Stepper Motor Driven Stage (-01 option pictured and in video) has k***s at the back of the stepper motors for manual adjustments. With a 10 microsteps-per-step motor driver the repeatability of the stepper motor stages is +/- 0.01 degrees and travel speeds of 30 degrees-per-second (yaw stage) and 14 degrees-per-second (pitch and roll stages) can be achieved. Option -02 is driven by Three Phase-Servo Motors with Quadrature Optical Encoders, and option -03 is Brushed DC Servo Motor Driven with Quadrature Optical Encoders. The servo driven stages (-02 and -03) in a closed loop offer the highest precision and travel speeds. The -04 option is Stepper Motor Driven with Quadrature Optical Encoders for position verification.

These four axis stages are the ideal choices for: Optics, laser scanning and pointing, drilling and machining, identifying crystals, estimating hyperspectral bidirectional reflectance, aligning mirrors, reverse engineering, inspection, assembly, measurements, tracking, and positioning, and manufacturing quartz oscillator plates.

The rotary axis has a precision pattern of threaded holes for mounting tooling or fixtures and is equipped with a HOME switch to signal the motion controller for initial HOME positioning. The goniometer (pitch and roll) axes are equipped with positive and negative limit switches to signal the motion controller that end of travel is reached. The Goniometers and Rotary axes have calibrated scales for visual inspection.

Each of these stages can be ordered with a fully plug-and-play compatible multi-axis motion controller, joystick or trackball and keypad for any motor combination from OES.

For additional information, contact our sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, or E-Mail: [email protected] or visit the Web site at: http://www.oesincorp.com.

05/22/2024

Visit and Follow https://www.facebook.com/LM76Blogger/ to really appreciate what "Out-of-the-Box" solutions using Linear Bearing can Look Like!

05/20/2024

Motion Control – Rotational Voice Coil Stage quickly and repeatably steers an optical beam with a diameter of up to 25 millimeters over 90° with 25 microradians of resolution!
September 4th, 2023 Editor-Publisher
Motion Control – Rotational Voice Coil Stage
Quickly and repeatably steer an optical beam with a diameter of up to 25 millimeters over 90° with 25 microradians of resolution!

Motion Control – RVC-9025 Rotational Voice Coil Stage: Up to 25mm wide mirror; Controllable positioning over +/-45 degree optical; 5 arcsec (25 microradians) optical position repeatability; 1 degree optical step-and-settle in less than 5ms; Fully integrated servo controller; USB 2.0 and auxilary user electrical interfaces; X 58 x 28 x 21 millimeters, 30 grams

motion control - Rotational Stage

Forestville, CA – Motion Control – The RVC-9025 Rotational Voice Coil Stage provides a means to quickly and accurately set an angular position. The frequency is factory adjusted to customer specifications during the manufacturing process. Amplitude of the resonating mirror can be adjusted through either an analog input voltage or the USB interface.

motion control - miniature stages

An optional high-resolution position feedback sensor can be monitored by an analog output signal on the User Connector.

The RS-25 Resonant Scanner can also be configured with a high-resolution 16-bit Analog to Digital Converter to quickly sample and report the mirror position at any moment if the position sensor is included.

The RVC-9025 Rotational Voice Coil Stage provides a means to quickly and repeatably steer an optical beam with a diameter of up to 25 millimeters over 90° with 25 microradians of resolution. The RS-25 Resonant Scanner is designed and optimized for applications that typically require a means to scan an optical beam. Using various patent pending features the RS-25 Resonant Scanner can run 24/7 forever without compromise. At the heart of this product is a pair of carefully designed flexures that mimic the spring in a classical spring-mass harmonic motion system. The mirror or other load acts as the mass and together a natural resonating frequency is borne that provides unparalled performance and reliability. A small motor is carefully coupled to the system to makeup for small system losses that would otherwise dampen the oscillation.

The Mirror: The mirror is an integral part of the motion control RVC-9025 and is usually specified at time of order. The mirror and its associated inertia will largely predict the overall step and settle time of the actuator. With that in mind the user should careful consider parameters surrounding the mirror including its shape and flatness. The mirror should be no wider than absolutely necessary and sufficiently long to accommodate the beam elongation as a consequence of the tilting process. Mirror flatness will largely dictate its thickness and overall inertia. In special cases, mirror thickness and its affects on inertia can be managed using costlier materials such as beryllium that have a higher specific stiffness. As the mirror thickness grows, its front surface will proportionally move further off the rotational axis which in some cases can be undesirable. Other parameters including coating and scratch/dig need to be included to fully describe the mirror. While a mirror is probably the most common payload other customer supplied or specified loads can be used such as gratings.

motion control - miniature rotaqtional stage

Position Sensor: The RVC-9025 is able to position its mirror with a resolution of 25 micro-radians in a large part because of the high-resolution sensor it uses. The analog nature of its non-contact sensor also makes it noise limited by adjusting its bandwidth. Careful control and optimization of the sensor signal permits the servo to operate at a higher bandwidth and thereby having a higher stiffness and exceptionally low positioning wander or hysteresis.

Voice Coil Motor: The RVC-9025 includes a high efficiency voice coil motor–somtimes referred to as a single phase DC motor. The motor coil is directly coupled to the mirror support beam and position sensor. That tight and rigid coupling of the load, actuator and sensor assures exceptional position repeatability and step-and-settle times. The high efficency of the motor coil yields a small and light-weight coil that adds little of the overall motion inertia.

Integrated Electronics: The RVC-9025 includes a highly miniaturized servo amplifier and controller. The mirror position can be controlled through either the USB and its 16-bit DAC or an analog input signal. At the same time mirror position can be monitored from and analog output or the USB and an optional 16-bit ADC. The auxiliary input header also provides a means to enable the amplifier and monitor it for faults. Thereby supporting a configuration for a deeply embedded and autonomous device.

motion control - rotational stage specifications

Click Here for:

RVC-9025 Rotational Voice Coil Stage Brochure

Voice Coil Stage Interfacing and User Manual

RVC-9025 Small Step Response

RVC-9025 Interface Drawing

RVC-9025 Rotational Voice Coil Stage Interface Drawings

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: [email protected] or visit the Website at http://www.equipsolutions.com

05/16/2024

Motion in XYZ-Theta – Select XTREME 6000, Full Ceramic Radial Bearings from CERAMICSPEED for Extreme Environment Applications!

Motion in XYZ-Theta – Full Ceramic Ball Radial Bearings

E. Longmeadow, MA –Motion in XYZ-Theta – The XTREME 6000 ZrO2 Series of Full Ceramic Radial Bearings from CeramicSpeed are designed to provide levels of performance in extreme environments beyond the capabilities of steel and even hybrid bearings. The complementing components of these bearings were carefully selected to provide the highest levels of performance in high temperatures, and adverse environments such as: Submerged in water, high pressure steam, chemicals, and caustic fluids.

The outer and inner races of these bearings are meticulously crafted from zirconium dioxide (ZrO2). Zirconium dioxide is exceptionally tough and has heat expansion properties closely matching those of steel for easy integration into new or existing applications.

Silicon nitride (Si3N4) was selected for the bearing balls as it can achieve the highest possible smoothness and roundness. The standard bearing cages are PTFE. Optional PEEK (Polyether ether ketone a thermoplastic polymer), cages with a high melting point can be specified as well as PTFE or PEEK shields. The combination of zirconium dioxide races and silicon nitride balls create a bearing with a very low coefficient of friction that are able to operate with very little or no lubrication. In extreme environments (high temperature, submerged, and corrosive atmospheres) they are unmatched in reliability, performance, long life, and efficiency.

XTREME 600 ZrO2 bearings in comparison to steel are lighter, nonconductive and nonmagnetic, with a much lower coefficient of friction than steel or hybrid bearings, and Silicon nitride (Si3N4) balls will not spall. Applications include: Medical, pharmaceutical, aerospace, maritime, industrial, food, dairy and beverage.

To follow the NEW Series from LM76, THE ENGINEERING EDGE! and learn about interesting Outside-of-the-Box solutions developed by LM76 to solve some interesting linear motion problems! CLICK HERE - https://lm76blogger.com/the-engineering-edge

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: [email protected] or visit the website at http://www.lm76.com

05/10/2024

Motion Control – New Miniature Gearhead from Harmonic Drive LLC: The CSF-2XH

Motion Control – Miniature Harmonic Drive Gearhead!

THIS ZERO BACKLASH MINI GEARHEAD IS IDEAL FOR SERVO & STEPPER MOTOR

Vaughan, Ontario, Canada — Motion Control – Electromate – Harmonic Drive LLC, a leading provider of precision motion control solutions, is proud to announce the release of its CSF-2XH mini gearhead designed for servo and stepper motors.

Available with an output shaft or fl**ge, the CSF-2XH miniature gearheads are offered in 4 sizes with gear ratios 30:1 to 100:1 and peak torque: .5~28Nm. These mini strain wave gears are ideal for semiconductor and robotics applications.

Features include:

Zero backlash
High positioning accuracy (± 1.5 to 10 arc-min ) in a very compact package
Compact 4-point ball bearing mounted in main shaft
⌀22mm~53mm
S tooth profile
Fl**ge (F) or Shaft (J) output available
About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at [email protected] or visit Electromate at: www.electromate.com

05/08/2024

Motion Control Stages - Create Precision Linear and Rotary Multi-axis Stages to Suit Your Specific Application!

OES (Optimal Engineering Systems) has a series of high precision, low cost Multi-axis Stages that can be easily integrated into new and existing applications. These Positioning Stages, the integration of linear motion stages and rotary stages, are offered in stroke lengths for the X and Y axis Linear Stages of 50 mm to 1000 mm, and the 360 degrees continuous rotation Rotary Stages are available with 40 mm, 60 mm, and 100 mm diameter tables.

The XYR Combination 3-axis Stages with Two-phase Stepper Motors (pictured) are standard and have k***s for manual adjustment. The k***s can be replaced with an incremental Quadrature Optical Encoders for position verification. Three-Phase Brushless Servo Motors with Quadrature Optical Encoders or Brushed DC Servo Motors with Quadrature Optical Encoders are offered for closed loop servo operation offering greater resolution, accuracy, repeatability, and higher travel speeds.

These highly adaptable multi-axis stages feature high precision steel linear ball bearings and hardened steel shafting, and the tables have a precise pattern of threaded mounting holes. The stages are compatible with the OES line of motion controllers, and available as a complete Plug-and-Play motion control system, including a Joystick, or Trackball, and Keypad.

For additional information contact our sales team at Optimal Engineering Systems, Inc. (OES), 6901 Woodley Ave, Van Nuys, CA 91406; Tel 888-777-1826, +1 818-222-9200, E-Mail [email protected] or visit the website at http://www.oesincorp.com

05/01/2024

Motion Control – Compact 1.25 Micron Resolution Direct Drive Linear Actuator Features High Speed, Zero Cogging!

Motion Control Stage- Hollow Core Voice Coil Stage

Van Nuys, CA – Motion Control – A New, compact, Electric Cylinder or Linear Voice Coil Actuator 38.1 mm (1.500 in.) in diameter, with a 12.7 mm (0.500 in.) stroke, and a housing length of 69.9 mm (2.750 in.) long has been released by Moticont.

This new SDLM-0038-070-01-01M Linear DC Actuator features high repeatability, 1.25 micron resolution, a continuous force of 14.5 N (3.2 lbs.), and a peak force of 45.8 N (10.3 lbs.). To operate at peak efficiency an integral temperature sensor provides data to achieve the highest possible throughput.

Each end of the housing features threaded mounting holes on a 19.1 mm (0.75 in.) bolt circle for universal mounting. This high speed, high acceleration/deceleration, non-cogging, high 1.25 micron resolution, high force-to-size Electric Cylinder has a linear encoder mounted internally for closed loop servo operation.

The 6.4 mm (0.250 in.) non-rotating shaft has internal threaded holes for direct, zero backlash, connections to a load at each end. Additionally, the shaft is supported at both ends by long life linear bearings and can tolerate side loads up to 24.0 N (5.4 lbs.). These clean, quiet linear actuators have a HOME sensor. They are ideal for: medical, assembly, work holding and clamping, sorting, laser machining and drilling, packaging, sampling, scanning, laser beam steering and filtering applications.

A complete Plug-and-Play servo controller is also available.

Is there a need for a smaller or larger diameter motor, one with longer travel, more force, Imperial or Metric, select from the many choices available in this expanding family of SDLM linear motors based on size, length of stroke, and force.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, [email protected] visit the website at http://www.moticont.com

Motion Control Web

01/18/2025

12/26/2024

10/18/2024

07/03/2024

06/02/2024

05/22/2024

05/20/2024

05/16/2024

05/10/2024

05/08/2024

05/01/2024

Address

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category