Motion Control Buyers Guide

02/14/2025

Motion Control Homepage – Rotary Solenoids Matched to An Application Are Available in OEM Quantities!

Motion Control – The R-09-150 CWN Series of Clockwise, Reverse Shaft Extension Rotary Solenoids from Magnetic Sensor Systems (MSS), available in OEM quantities, features 18 different winding configurations allowing the user to match torque and duty cycle requirements to an application.

These compact 38.1 mm (1.50 in.) diameter motion control solenoids are just 22.1 mm (0.87 in.) long and have two M4X0.7 threaded studs (8-32 studs optional) 7.4 mm (0.29 in.) long on a 22.2 mm (0.875 in.) bolt circle. The reverse shaft has 40 degrees of clockwise rotation, extending 13.0 mm (0.51 in.). Shaft end is serrated for better grip of the attached load.

The R-09-150 CCWM Series of Rotary Solenoids can be specified with a choice of AWG winding of 21 to 37 gauge. Specifying a different AWG for the windings allows the user to control the performance of a solenoid with respect to duty cycle, current supplied, and torque by controlling the ampere turns. As an example: Starting torque of a solenoid at 9 w, 100% duty cycle, is 3.0 oz-in. (0.021 Nm) and start torque of a solenoid at 90 w, 10% duty cycle is 21 oz-in. 0.15 Nm). When voltage is removed, a built-in return spring returns the shaft to the home position.

All MSS electromagnets use materials that quickly lose residual magnetism when the current is removed. The E-05-125 Series has a 10-32 UNC-2B threaded mounting hole on the backside for easy integration into new and existing applications.

The shaft is supported by two high precision radial ball bearings with no axial movement.
Low cost, the R-09-150 CWN Series of motion control Rotary Solenoids feature long life, clean and quiet operation are ideal for: Office machines, security mechanisms (interlocks), medical devices, assembly, sorting, clamping, packaging, shutter actuation, vending, and games. Please consult our Sales Team if another size, higher forces, direction of rotation, or mounting configuration is required.

For additional information contact the Sales Team at Magnetic Sensor Systems, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-9444, Tel: +1 (818) 785-6244, E-Mail [email protected] or visit the website at http://www.magneticsensor systems.com

01/18/2025

Motion Control – NEW! YouTube Channel features High Precision Stages from Optimal Engineering Systems!

Motion Control – OES YouTube Channel!

Motion Control – Optimal Engineering Systems, Inc. (OES) has unveiled their new YouTube Channel https://www.youtube.com/. Checkout their new video featuring the AK110-10-15 Alpha-Beta Dual axis Goniometer Stage.

Goniometer stages can measure angles of objects such as crystals or move an object to a precise angular position along an arc, in relation to a fixed point in space. Two goniometer stages mounted in an alpha-beta configuration (stacked) can rotate an object around a fixed point in space on a spherical surface.

The lower goniometer stage features ± 10 degrees of rotation at a rate of 14 degrees per second with stepper motor and 90 degrees per second with Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder. The upper goniometer stage features a 65 mm x 65 mm table, ± 15 degrees of rotation at a rate of 14 degrees per second with stepper motor and 90 degrees per second with Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder. The accuracies for each unit are; repeatability: ± 4″ (240 arcseconds), typical Positioning accuracy: ± 9″ (540 arcseconds), and typical backlash is ± 3″ (180 arcseconds).

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: [email protected] or visit the website at http://www.oesincorp.com

See this and other Motion Control Components from OES (Optimal Engineering Systems, Inc.) featured on:

OES is now on YouTube …..https://www.youtube.com/watch?v=wdUzIagcMYc

At Optimal Engineering Systems we have motion under control. Whatever the need, whether it is a single axis linear motion stage or a more complex 4 axes stage including a rotary, elevator, or goniometer axis, our manufacturing and research facility in North America, and our dedicated staff is ready....

12/26/2024

Motion Control – Maxon Adds Dynamism to Robotic Servo Motors

Motion Control Advanced Compact Motors and Gearheads for High-Performance Robotics

Motion Control – Electromate, Canada’s premier distributor of motion control solutions, is proud to announce the release of maxon’s EC Frameless DT50 Motor and ECX Flat Series DC Motors and Gearheads, designed to meet the demands of modern robotics and automation systems. The EC and ECX Series motors and gearheads offer compact, efficient drive systems with exceptional torque and power density, making them ideal for applications requiring precise motion control.

Key Motion Control Products in the EC Series:

EC Frameless DT50 Motor: Designed for rapid speed transitions in collaborative robots and exoskeletons. The DT50 motor features a large hollow shaft and compact design, optimized for integration into custom robotic systems. The DT50 effortlessly reaches a nominal torque of over 500 mNm at a nominal speed of 4,000 rpm.
ECX Flat Motor Series: These motors are recognized for their power density and compact form factor, making them ideal for space-constrained applications. The ECX Flat iron-wound motors are available with diameters of 22 mm, 32 mm, and 42 mm each and in short or long versions. The short versions are just 14 mm, 16 mm, or 21 mm in length.
Both motion control motor series are complemented by maxon’s precision gearheads, which ensure smooth torque transmission and minimal backlash—critical for applications requiring high precision and dynamic movement

Modular Design for Easy Configuration

The modular nature of maxon’s motion control drive systems allows for easy integration with other maxon components, offering engineers flexibility and scalability for their projects. Whether used in lightweight mobile robots or industrial pick-and-place systems, the ECX Series ensures high dynamic performance and energy efficiency, allowing engineers to optimize their robotic systems for maximum output.

Product Highlights:

High Power Density in a Compact Design
Precision Torque Transmission with Minimal Backlash
Efficiency Ratings up to 86%
Modular Design for Seamless Integration
Proven Reliability in Harsh Environments
For more information, visit

EC Frameless DT50 Motor Information

ECX Flat Motor Series Information

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at [email protected] or visit Electromate at: www.electromate.com

10/30/2024

Motion Control – New! Large Three-axis Gimbal Mounts Feature High Resolution, and Four Motor Options

Motion Control Gimbal

Designed for larger cameras, tracking devices, telescopes, optics, and other devices, four new, high resolution, three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). This new series of Three Axis Gimbal Mounts are 588 mm wide by 463 mm high, and handle loads up to 10 kg. The AU400-AER (Azimuth, Elevation, and Roll) Series of Three Axis Gimbal Mounts feature high precision 180:1 worm gear driven “V” groove rotary stages.

Each axis is capable of 360 degrees of continuous rotation in clockwise and counter-clockwise directions. The position is held economically when the motor current is removed as worm gears cannot be back driven. The Roll Stage has a precision pattern of threaded holes for mounting tooling, cameras, lasers, etc., and a through hole for cables and optics. Devices up to 395 mm wide can be mounted on the rotary stage.

Motor options to power each stage include: Two Phase-Stepper Motors (AU400-AER-01), Three Phase Brushless Servo Motors with Quadrature Incremental Optical Encoders (AU400-AER-02), DC Servo Motors with Quadrature Incremental Optical Encoders (AU400-AER-03), or Two-Phase Stepper Motors with Quadrature Incremental Optical Encoders for position verification (AU400-AER-04). Electrical connections are made using 9 pin DB-9 connectors.

The resolution of each stage is 0.001 degree or 3.6 arcsec with 10 micro-steps per Step Motor Driver in use. Higher resolutions and travel speeds to 45 degrees per second are possible with the servo motor options. Each axis has a HOME switch for precision initialization on power up.

An optional 360 mm x 360 mm aluminum plate with four handles and mounting holes for increased stability is available and these Three-axis Gimbal Mounts can be ordered as a complete plug-and-play system with a multi-axis motion controller, joystick, trackball, or keypad.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: [email protected] or visit the website at http://www.oesincorp.com

10/18/2024

Motion Control – Linear Focus Actuator from Equipment Solutions features 200 Nanometer position Repeatability!

This Custom LFA-2003 Linear Focus Actuator Features: 20 millimeter clear aperture, 3 millimeters linear motion, 200 nanometer position repeatability, Flexture guidance system, ‘C’ mount lens adapter, integrated coil temperature sensor, direct SCA814 Servo Controlled Amplifier compatibility, 74mm x 61mm, 690 grams.

For information on the compatible SCA-814 Servo Controlled Amplifier - https://www.equipsolutions.com/products/linear-servo-controllers/sca814-linear-servo-controller

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation, motion control, and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: [email protected] or visit the Website at http://www.equipsolutions.com