DW Motion Control Marketing

10/18/2024

Motion Control – Select From the S-20-100X Series of 1 Inch Dia. Pull Type Solenoids to Meet Voltage, Duty Cycle, Force, and Stroke Requirements of an Application!

Motion Control – Tubular Solenoids
Magnetic Sensor Systems (MSS) has released their S-20-100X model of Pull Type Tubular Solenoids. Their S-20-100X series of solenoids features 18 different solenoids to select from based on the Voltage, Duty Cycle, Force and Stroke requirement of the user.

MSS Solenoids coils typically utilize Class “F” 23 to 40 AWG (American Wire Gauge) windings with Class “A” insulation for better protection of the solenoid during longer duty cycles.

The motion control S-20-100X solenoids feature a 1.000 in. diameter x 2.000 in. long housing and a 3/4 -16 UNF-2A thread for mounting. The noncaptive plunger or actuator has a diameter of 0.437 in. with a clevis end for load attachment. A low friction brass guide and PTFE coating on the plunger assures exceptionally long life.

These clean, high efficiency, low cost, precise tubular solenoids can be operated at 1/10, 1/4, 1/2, and continuous duty cycles (voltage dependent) and are the ideal choice for: Vending machines, medical dispensing, mixing, valve control, farm machinery, disconnects, transmission shifting, fire suppression systems, cabinet locks, door controls, and sorting equipment.

About Magnetic Sensor Systems – Established in 1983, Magnetic Sensor Systems (MSS) designs and manufactures high quality motion control solenoids, electromagnets, driving electronics and other types of electro-mechanical components for a variety of industries and applications.

Part of Magnetic Sensor Systems’ competitive advantage is its state-of the-art in-house manufacturing facility in North America. Highly controlled processes, committed staff and extensive testing complement their product design strengths. This enables Magnetic Sensor Systems to supply the most demanding clients from specialized small orders to high volume just-in-time deliveries. Magnetic Sensor Systems is an ISO 90001:2015 certified company.

Through wise and aggressive use of their resources and technology, MSS has become recognized as one of the world’s leading solenoid manufactures with a global customer base.

An extensive line of standard products are ready to be shipped immediately from stock, however, when required, their highly trained design engineers, are always available to work with a customer’s design staff to augment or develop a custom product to fit the specific needs of the customer.

For additional information contact the Sales Team at Magnetic Sensor Systems, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-9444, Tel: +1 (818) 785-6244, E-Mail [email protected] or visit the website at http://www.magneticsensor systems.com

05/20/2024

Motion Control – USDA Certified Stand-Off Bearing Fl**ge Blocks with Si3N4 Silicon Nitride Hybrid Bearings, Set New Standard for Performance and Hygienics!

Motion Control – USDA Certified Stand-Off Bearing Fl**ge Blocks

Motion Control – FDA/USDA Certified, two, three and four post, Stand-Off Bearing Fl**ge Blocks are setting a new standard for performance and Hygienics. These new Stand-off bearing fl**ge blocks now available from LM76 reduce the surface area where mold and bacteria can thrive, even from the most through sanitizing operations. Long life Hybrid Stainless Steel Si3N4 Silicon Nitride Ceramic Ball Bearings in Stainless Steel bearing blocks are coated with a smooth non-water absorbing polyamide coating certified by EHEDG, USDA, and 3-A.

These FDA/Wash-Down fl**ge bearings employ Hybrid Stainless Steel/Ceramic Ball Bearings that are sealed from contaminates and bacteria via a patented shaft seal system. The seals resist water, cleaning solutions – keeping lubrication from being corrupted and evacuated.

Designed for up to 2000 rpms of continuous operation, they are available for .750 in., 1.000 in., 1.250 in., 1.375 in., and 1.500 in. shafts. Metrics range from 20mm- 40mm. Both inch and metric fl**ge blocks are available in open and closed end configurations. For engineering assistance, step files and pricing consult Mike Quinn from LM76.

When downtime is not an option Stainless/Ceramic Hybrid Si3N4 Silicon Nitride Ball Bearings are the only option. The very hard and smooth Si3Nn bearing balls have lower friction and vibration, lower thermal expansion and heat transmission, all but eliminating catastrophic failure. Additionally, optional mounting bolts, nuts, spacers, end caps, and seals have been meticulously designed to prevent the accumulation of any contaminates. These bearing fl**ge blocks are a complement to the broad range of LM76 linear bearings, shafting and slides that are FDA/USDA/3A Dairy compliant.

When others think catalog … … LM76 thinks solution!

To follow the Series from LM76, THE ENGINEERING EDGE! and learn about interesting Outside-of-the-Box solutions developed by LM76 to solve some interesting linear motion problems! CLICK HERE https://lm76blogger.com/the-engineering-edge

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of motion control linear bearings, slides and linear motion control systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Cell: 617-538-8756, Fax: 413-525-3735 or E-Mail: [email protected] or visit the website at http://www.lm76.com

05/11/2024

Motion Control – the LFA-3403 Is an Open Aperture Linear Focus Actuator from Equipment Solutions

MotionShop – LFA-3404 Linear Focus Actuator: 34 millimeter clear aperture, 4 millimeter range of motion,

05/10/2024

Motion Control – Open Frame Series of 18 Pull Type Solenoids with a 1 Inch Stroke Can Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications!

Motion Control – Open Frame Solenoids

Motion Control – Van Nuys, CA – The S-18-100 Series of Open Frame Pull Type Solenoids from Magnetic Sensor Systems (MSS) includes 18 different solenoids to select from based on the Voltage, Duty Cycle, Attractive Force (up to 100 oz) and Stroke requirements of the user. MSS Solenoid coils typically utilize 23 to 40 AWG (American Wire Gauge) windings with Class “F” insulation for better protection of the solenoid during longer duty cycles.

The S-18-100 Series solenoids are 1.000 in. wide x 0.84 in. high x 1.74 long and have a 1.00 stroke. The noncaptive plunger or actuator is 0.312 in. in diameter with a clevis end for load attachment.

A low friction brass guide and PTFE coating on the plunger assures exceptionally long life. For easy integration into new and existing applications, these solenoids feature 0.187 spade connectors and two 0.4 x 0.7 or 8-32 threaded mounting holes.

These clean, high efficiency, low cost, precise open frame solenoids can be operated at a variety of duty cycles (voltage dependent) and are the ideal choice for: Medical dispensing, mixing, valve control, disconnects, vending machines, farm machinery, transmission shifting, fire suppression systems, cabinet locks, door controls, and sorting equipment.

An application will dictate the selection of either an S-18-100LC2 or S-18-100LF2 solenoid. The “C” in the S-18-100LC2 indicates the plunger ends and the mating stops are conical shaped, whereas “F” in the S-18-100LF2 indicates the shape of the plunger ends and stops as flat. The difference is realized when the two coils of the solenoids, connected in parallel, are supplied with 7.5 watts of power. The conical ends and mating stops of the S-18-100LC2 have a lower latching force (1.4 lb.) and a higher push/pull force (0.5 lb.) in comparison to the S-18-100LF2 with its high latching force (5 lb.) and lower push/pull force (0.3 lb.) Typical applications include: Valve control, office equipment, switch activation, clamping, positioning, games and toys, vending machines, and door locks.

About Magnetic Sensor Systems – Established in 1983, Magnetic Sensor Systems (MSS) designs and manufactures high quality motion control solenoids, electromagnets, driving electronics and other types of electro-mechanical components for a variety of industries and applications.

Part of Magnetic Sensor Systems’ competitive advantage is its state-of the-art in-house manufacturing facility in North America. Highly controlled processes, committed staff and extensive testing complement their product design strengths. This enables Magnetic Sensor Systems to supply the most demanding clients from specialized small orders to high volume just-in-time deliveries. Magnetic Sensor Systems is an ISO 90001:2015 certified company.

Through wise and aggressive use of their resources and technology, MSS has become recognized as one of the world’s leading solenoid manufactures with a global customer base.

An extensive line of standard products are ready to be shipped immediately from stock, however, when required, their highly trained design engineers, are always available to work with a customer’s design staff to augment or develop a custom product to fit the specific needs of the customer.

For additional information contact the Sales Team at Magnetic Sensor Systems, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-9444, Tel: +1 (818) 785-6244, E-Mail [email protected] or visit the website at http://www.magneticsensor systems.com

05/08/2024

OES (Optimal Engineering Systems) offers a series of high precision, low cost XYG Multiaxis Stages that can be easily integrated into new and existing applications. Linear Motion Stages in stroke lengths for the X axis and Y axis of 50 mm to 1000 mm can easily be integrated with a plus or minus 10 degree or plus or minus 15 degree Goniometer.

These XYG 3-axis Stages with Two-phase Stepper Motors (pictured) are standard and have k***s for manual adjustment. The k***s can be replaced with an incremental Quadrature Optical Encoders for position verification. Three-Phase Brushless Servo Motors with Quadrature Optical Encoders or Brushed DC Servo Motors with Quadrature Optical Encoders are offered for closed loop servo operation offering greater resolution, accuracy, repeatability, and higher travel speeds.

These highly adaptable XYG axis stages feature high precision steel linear ball bearings and hardened steel shafting, and the tables have a precise pattern of threaded mounting holes. The stages are compatible with the OES line of Multi-axis Controllers, and are available as a complete Plug-and-Play system, including a Joystick, or Trackball, and Keypad.

For additional information contact our sales team at Optimal Engineering Systems, Inc. (OES), 6901 Woodley Ave, Van Nuys, CA 91406; Tel 888-777-1826, +1 818-222-9200, E-Mail [email protected] or visit the website at http://www.oesincorp.com About OES – Optimal Engineering Systems, Inc.

04/20/2024

MotionShop.com invites you to check out these pages …
https://www.facebook.com/MotionControlHomepage/
https://www.facebook.com/InnovationsinMotionControl/
https://www.facebook.com/AllMotionBlog/
https://www.facebook.com/AutomationBlogger/
https://www.facebook.com/MotionControlBlogger/
https://www.facebook.com/MotionControlBuyersGuide/
https://www.facebook.com/MotionControlWeb/
https://www.facebook.com/MotionControlMktg/
https://www.facebook.com/XYZinMotion/
https://www.facebook.com/EquipmentSolutions.Blog/
https://www.facebook.com/LM76Blogger/

See these and other Motion Control Components featured on:

http://MotionShop.com.com

http://MotionControl-XYZ-Theta.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

03/18/2024

"XYZ in Motion" the video production department of Motion Control Marketing, updated and existing video for Moticont and prepared a brief accompaning Product Release.

"High Speed, High Precision Linear Voice Coil Positioning Stage features 1 Micron Resolution!"

High performance compact positioning voice coil driven linear stages are used in positioning applications where high speed, high acceleration or high accuracy is required.

The motorized linear stages are fully self-contained. Each stage utilizes one or two linear voice coil servo motor(s), a linear carriage system, an optical quadrature encoder feedback device and a home switch. The standard positioning resolutions of 1 micron through 29.95 microns are available for immediate delivery. Other resolutions are available upon request.

Range of motion is from 0.50” (12.7 mm) through 5.20” (132.1 mm). Continuous (stall) forces range from 1 lb (4.5 N) through 23.0 lb (102 N). The intermittent forces at 10% duty cycle are from 3.1 lb (13.8 N) through 73 lb (323 N).
The stages may be stacked in XY, XZ and XYZ configurations.

For more information about this Motorized Stage, Voice Coil Linear Motors, Multi-axis Controllers, and Complete Motion Control Systems go to http://www.moticont.com

03/18/2024

Motion Control Marketing - Miniature Voice Coil Stage has 35 mm Travel and Features 200 Nanometer Position Repeatability!

VCS-35 Voice Coil Stage: 35mm of linear motion; Optional clear aperture; Recirculating ball bearing guidance system; 200 nanometer position repeatability; 37 G’s acceleration; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 41 x 102mm, 320 grams

Forestville, CA – Motion Control Web – Products – Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems.

ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: [email protected] or visit the Website at http://www.equipsolutions.com

03/05/2024

OES (Optimal Engineering Systems) has introduced the AQ110 series of high precision, low cost XY-axes motion control stages that can be easily integrated into new and existing applications.

They are offered in 4 stroke lengths of 15 mm , 30 mm, 50 mm, 75 mm. These multi axis stages are available in any combination of stroke lengths and motors. Depending on the levels of precision and speed of travel requirements, four motor options are available.

The -01 option is Stepper Motor driven (pictured) with k***s at the back of the stepper motors for manual adjustments. Option -02 is driven by Three Phase-Servo Motors, and option -03 is DC Servo Motor Driven. The servo driven stages (options -02 and -03) have Quadrature Optical Encoders and offer the highest precision and travel speeds. The -04 option is Stepper Motor Driven with Quadrature Optical Encoders for position verification. These highly adaptable XY-axis motion control stages feature high precision cross roller bearings and the tables have a precise pattern of threaded mounting holes.

These motion control dual axis stages are compatible with OES' line of multi axis controllers and are available as complete Plug-and-Play motion control systems including: Joystick, Trackball, and Keypad.

For additional information contact our sales team at Optimal Engineering Systems, Inc. (OES), 6901 Woodley Ave, Van Nuys, CA 91406; Tel 888-777-1826, +1 818-222-9200, E-Mail [email protected] or visit the website at http://www.oesincorp.com

OES is a manufacturer of high precision motion control products including: Single and Multiaxis Servo Motor and Stepper Motor Controllers, drivers, solenoid electronics, and Single -axis stages (X, Y, and Z axis linear motion stages, Theta (rotary) stages, Vertical Lift (Elevator) stages, and Goniometer stages. Multiaxis Stages including Linear (X, Y, and Z- axes), Theta (Rotary), Vertical Lift (Elevator), and G-axis (Goniometer) stages can be integrated for specific applications. Servo Motor driven stages with Quadrature Optical Encoders can provide sub-micron resolutions. Two and three axes Gimbal mounts are also available.
Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

03/05/2024

Motion Control – Brushless AC Servo Motors!

Kollmorgen has recently introduced the new EKM series of Enhanced, High-Performance, Brushless AC Servo Motors. EKM Series Motors are Mil-Spec 810E rated and IP67 sealed for duty in harsh environmental conditions.

These enhanced, high-performance motors are MilSpec 810E rated and IP67 sealed. They are supplied standard with a stainless-steel shaft and chemical agent-resistant paint for reliable duty in harsh environmental conditions.

The EKM brushless servo motors feature:
» Industry leading power and torque density
» Ideal for most aerospace and military specifications
» C.O.T.S (commercial off the shelf) solution
» Standard product offering with customization available
» Meets IP67 sealing requirements and is 100% leak-tested housing for further moisture blocking

Features include:
0.43 to 53 Nm continuous stall torque (3.8 to 467 lbin)
Speeds up to 8000 RPM meet high speed requirements
480 VAC High Voltage Insulation
Custom windings, shaft variations, and failsafe brakes available
Rugged resolver feedback for extreme environment Operating temperature range of -51°C to 54° C
Shock and vibration tested per MILSTD810E, Methods 516.4 & 514.4, Procedure 1
International standard mount available
Low-cog, low harmonic distortion magnetic designs
Connectivity: High performance nickel-plated MIL-C-38999 connectors with total environmental sealing, quick mating, triple lead threaded, self-locking coupling, as well as EMI and RFI shielding. In addition, both front-facing and rear-facing options are available.
Stainless steel shaft and fasteners prevent external corrosion while a chemical agent resistant paint allows resistance to harsh outdoor environments and chemicals
Sealing: IP67 rated for ingress prevention and brief submergence as well as 100-psi wash down. In addition, a viton shaft seal comes standard

For more information, visit EKM Servo Motor Selection Guide at:
https://www.electromate.com/media/assets/catalog-library/pdfs/kollmorgen/EKM-KM_SG_000135_RevB_EN.pdf

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 FREE (737-8699) or e-mail Warren Osak at [email protected] or visit Electromate at: www.electromate.com

03/23/2015

The Equipment Solutions LFAQ-2010 Linear Focus Actuator was featured on photonics.com http://ow.ly/KHLAx

For optical applications requiring both high precision and high speed positioning over a short to medium stroke, Equipment Solutions Inc. provides the