09/08/2020
Print Head Cleaning AnaJet Gen 4
The price for print head cleaning is $249 per Print head. We have a process that puts the clogged print head through an ultrasonic flushing, while using specialized clogged cleaning solutions. This process takes from about 4 hrs to a couple of days per head to go through the process. So far we have only worked on the Anajet mPower Gen 4 printer heads and we have had a very good success rate.
What you do is send us your print heads to our shop at:
Sharp Typesetting, 507 S. Quaker Ave., Tulsa, OK 74120
If possible they should be FLUSHED OUT and sealed in an appropriate shipping packed to prevent damage to the print head components, cables or face of the print head.
If the cleaning process is successful, we will send a short video of the print head waterfall so you can be confident that we were successful in the cleaning process. Once your print head is received, you will be invoiced $249 plus whatever shipping speed you request for the return of the print head. Print head will be returned in the same shipping package as received.
Due to the amount of cleaning solutions used and the labor intensive techniques involved in attempting to clean the print head, there are no refunds for the cost of the print head cleaning service. If we cannot get the print head cleaned, however any prepaid return shipping cost will be refunded if you chose not to have the print head returned to you.
There are several video tutorial on the web on how to properly and safely remove your print head. If you need any help on removing you print heads please contact us.
A complete print head cleaning is not guaranteed. Please note that even a perfectly clean print head may not print well. There are many other factors affecting print quality, such as the condition of the nozzle plate coating, wear and tear of the piezo crystals, malfunctioning electronics, etc. There is a risk of print head damage during the cleaning process. We are not liable for any damage to your print heads or any other subsequent damages as a result. We are also not responsible for lost or damaged print heads after shipping. The customer is responsible for insurance on all print head shipments.
We WILL NOT be responsible for pre-existing “communication errors” or cables errors on print heads. Print heads that have been cleaned, but still don’t operate properly in your printer. In other words…. We don’t know what could
be wrong with your print head, we just work on cleaning it. This service is for “cleaning clogs” in print heads and we
determine that by getting a complete waterfall of special cleaning liquid. Makes sense. Right?
